{"title":"Engine Components","description":"\u003cp\u003ePower is nothing without the right supporting parts.\u003c\/p\u003e\n\u003cp\u003eAs performance increases, supporting engine components become more important. Upgrading key engine parts improves reliability, efficiency and overall performance.\u003c\/p\u003e\n\u003cp\u003eAt \u003cstrong\u003eFifty9 Performance\u003c\/strong\u003e, we supply \u003cstrong\u003eperformance engine components in the UK\u003c\/strong\u003e designed to support higher power builds and demanding driving conditions.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eEngine Mounts\u003c\/strong\u003e - reduce engine movement and improve response\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCatch Cans\u003c\/strong\u003e - improve crankcase ventilation\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBreather Systems\u003c\/strong\u003e - improve airflow and engine efficiency\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupporting Engine Hardware\u003c\/strong\u003e - components designed for performance builds\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eIf you are looking for \u003cstrong\u003eperformance engine upgrades, catch cans or supporting engine components\u003c\/strong\u003e, our collection provides the parts needed to support higher performance levels.\u003c\/p\u003e","products":[{"product_id":"bmw-m5-g90-g99-pre-preg-carbon-fibre-engine-cover-by-form-2024","title":"BMW M5 G90 G99 Pre-Preg Carbon Fibre Engine Cover by FORM (2024+)","description":"\u003cp\u003eElevate the upper silhouette of your BMW M5 G90 G99 with the Pre-Preg Carbon Fibre Engine Cover from FORM. This direct-replacement part delivers an understated performance detail that elevates the car's entire exterior.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eKey Features:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDirect OEM fitment\u003c\/strong\u003e — retains factory mounting points, wiring connectors, and sensor cut-outs where applicable\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUV-stable clear coat\u003c\/strong\u003e prevents yellowing, fogging, and weave degradation over time\u003c\/li\u003e\n\u003cli\u003eSubtle but unmistakable upper-profile styling upgrade\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAutoclave-cured pre-preg carbon fibre\u003c\/strong\u003e construction for a consistent 2x2 twill weave and show-quality clear-coat finish\u003c\/li\u003e\n\u003cli\u003eDirect-fit over or in place of the factory component\u003c\/li\u003e\n\u003cli\u003eBacked by \u003cstrong\u003eFORM Industries\u003c\/strong\u003e — a trusted name in OEM-level aftermarket upgrades for modern performance cars\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cstrong\u003eConstruction:\u003c\/strong\u003e Built using \u003cstrong\u003epre-preg carbon fibre\u003c\/strong\u003e — carbon cloth pre-impregnated with resin, then vacuum-bagged and autoclave-cured under precise heat and pressure. This is the same process used for OEM supercar bodywork and track-homologated race parts. The benefit over cheaper wet-layup carbon is a tighter weave, a more consistent finish, and a clear coat that won't yellow or cloud over time.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eFitment:\u003c\/strong\u003e This product is designed specifically for the \u003cstrong\u003eBMW M5 G90 G99\u003c\/strong\u003e, model years \u003cstrong\u003e2024+\u003c\/strong\u003e. It integrates with the factory panel lines, mounting points, and (where applicable) electronic systems, meaning no cutting, drilling, or bodywork modification is required for a standard install. Please double-check your chassis code against the listed fitment before ordering — if you're unsure, our support team is happy to confirm compatibility for your exact vehicle.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eInstallation:\u003c\/strong\u003e Fitment is straightforward for an experienced installer using standard hand tools. We strongly recommend installation by a qualified bodyshop or detailer, particularly for exterior components that require panel alignment, adhesive bonding, or painted-surface preparation. Full fitment guidance is provided in the box, and our support team can help confirm the best approach for your specific car.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eAbout FORM Industries:\u003c\/strong\u003e FORM Industries is a premium manufacturer of aftermarket exterior and interior upgrades for BMW, Audi, Mercedes-Benz, Volkswagen, Porsche, Tesla, and other modern performance vehicles. Every FORM part is engineered in-house, tested against OEM fitment standards, and finished to a specification that matches — and often exceeds — the factory equivalent. From pre-preg carbon fibre through to OEM-grade gloss black, every component is built to deliver the look, feel, and longevity expected at this price point.\u003c\/p\u003e","brand":"FORM Industries","offers":[{"title":"Default Title","offer_id":55620888658260,"sku":"FO-BG90ECCF","price":899.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1019\/0425\/3268\/files\/bmw-m5-g90-g99-pre-preg-carbon-fibre-engine-cover-by-lyte-2024-lyte-carbon-roofs-accessories-1180449_b6c3b0a4-80d3-4066-b1cc-6639f842ea20.jpg?v=1778501550"},{"product_id":"bmw-m2-g87-m3-g80-g81-and-m4-g82-g83-pre-preg-carbon-fibre-engine-cover-by-form-2021","title":"BMW M2 G87, M3 G80 G81 \u0026 M4 G82 G83 Pre-Preg Carbon Fibre Engine Cover by FORM (2021+)","description":"\u003cp\u003eTransform the engine bay presentation of your BMW M2 G87, M3 G80 G81 \u0026amp; M4 G82 G83 with the Pre-Preg Carbon Fibre Engine Cover from FORM. This direct-replacement cover turns a functional component into a styling statement.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eKey Features:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDirect OEM fitment\u003c\/strong\u003e — retains factory mounting points, wiring connectors, and sensor cut-outs where applicable\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAutoclave-cured pre-preg carbon fibre\u003c\/strong\u003e construction for a consistent 2x2 twill weave and show-quality clear-coat finish\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUV-stable clear coat\u003c\/strong\u003e prevents yellowing, fogging, and weave degradation over time\u003c\/li\u003e\n\u003cli\u003eSlots or clips over the factory engine\/bay cover with no modification\u003c\/li\u003e\n\u003cli\u003eTransforms the engine bay from functional to show-ready\u003c\/li\u003e\n\u003cli\u003eBacked by \u003cstrong\u003eFORM Industries\u003c\/strong\u003e — a trusted name in OEM-level aftermarket upgrades for modern performance cars\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cstrong\u003eMaterials \u0026amp; Construction:\u003c\/strong\u003e This component is produced from genuine \u003cstrong\u003epre-preg carbon fibre\u003c\/strong\u003e — the same autoclave-cured composite process used in Formula 1 and OEM performance parts. Unlike wet-layup or hand-laid alternatives, pre-preg delivers a tighter, more consistent weave, superior strength-to-weight ratio, and a show-finish gloss clear coat with full UV protection. The result is a part that looks as good in five years as it does on day one.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eFitment:\u003c\/strong\u003e This product is designed specifically for the \u003cstrong\u003eBMW M2 G87, M3 G80 G81 \u0026amp; M4 G82 G83\u003c\/strong\u003e, model years \u003cstrong\u003e2021+\u003c\/strong\u003e. It integrates with the factory panel lines, mounting points, and (where applicable) electronic systems, meaning no cutting, drilling, or bodywork modification is required for a standard install. Please double-check your chassis code against the listed fitment before ordering — if you're unsure, our support team is happy to confirm compatibility for your exact vehicle.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eInstallation:\u003c\/strong\u003e Fitment is straightforward for an experienced installer using standard hand tools. We strongly recommend installation by a qualified bodyshop or detailer, particularly for exterior components that require panel alignment, adhesive bonding, or painted-surface preparation. Full fitment guidance is provided in the box, and our support team can help confirm the best approach for your specific car.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eWhy FORM Industries:\u003c\/strong\u003e FORM has built a reputation among serious owners of BMW, Audi, and other modern performance cars by obsessing over the details most aftermarket brands skip — panel gap tolerances, UV-stable finishes, genuine pre-preg composite processes rather than cheaper wet-layup shortcuts, and in-house fitment testing on real cars rather than CAD models alone. The result is a range of parts that install like factory equipment and hold up the way factory equipment should.\u003c\/p\u003e","brand":"FORM Industries","offers":[{"title":"Default Title","offer_id":55620895768916,"sku":"FO-BG8XECCF","price":699.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1019\/0425\/3268\/files\/e6ea00b186da3cf38ef931ec89aac3d0_811ed6ab-8ffc-4827-94ad-9c164b627540.png?v=1778501645"},{"product_id":"bmw-g87-m2-g80-m3-and-g82-m4-pre-preg-carbon-fibre-ecu-battery-terminal-cover","title":"BMW G87 M2, G80 M3 \u0026 G82 M4 Pre-Preg Carbon Fibre ECU Battery Terminal Cover","description":"\u003cp\u003eTransform the engine bay presentation of your BMW G87 M2, G80 M3 \u0026amp; G82 M4 with the Pre-Preg Carbon Fibre Vehicle Dress Up Caps \u0026amp; Covers from FORM Industries. This direct-replacement cover turns a functional component into a styling statement.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eKey Features:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDirect OEM fitment\u003c\/strong\u003e — retains factory mounting points, wiring connectors, and sensor cut-outs where applicable\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAutoclave-cured pre-preg carbon fibre\u003c\/strong\u003e construction for a consistent 2x2 twill weave and show-quality clear-coat finish\u003c\/li\u003e\n\u003cli\u003eSlots or clips over the factory engine\/bay cover with no modification\u003c\/li\u003e\n\u003cli\u003eTransforms the engine bay from functional to show-ready\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUV-stable clear coat\u003c\/strong\u003e prevents yellowing, fogging, and weave degradation over time\u003c\/li\u003e\n\u003cli\u003eBacked by \u003cstrong\u003eFORM Industries\u003c\/strong\u003e — a trusted name in OEM-level aftermarket upgrades for modern performance cars\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cstrong\u003eMaterials:\u003c\/strong\u003e Every panel is pressed in \u003cstrong\u003epre-preg carbon fibre\u003c\/strong\u003e and autoclave-cured for a dense, consistent weave and a high-gloss factory finish. The UV-stable clear coat protects against sun fade, road grime, and the surface micro-cracking that can affect lower-grade carbon parts after a few seasons of use.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eVehicle Compatibility:\u003c\/strong\u003e Engineered for the \u003cstrong\u003eBMW G87 M2, G80 M3 \u0026amp; G82 M4\u003c\/strong\u003e. The part uses factory mounting hardware and (where relevant) existing wiring connectors, so a standard install requires no modification to your car's bodywork or wiring loom. Chassis codes matter — please confirm yours matches the listed fitment above before placing your order.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eInstallation:\u003c\/strong\u003e Fitment is straightforward for an experienced installer using standard hand tools. We strongly recommend installation by a qualified bodyshop or detailer, particularly for exterior components that require panel alignment, adhesive bonding, or painted-surface preparation. Full fitment guidance is provided in the box, and our support team can help confirm the best approach for your specific car.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eAbout FORM Industries:\u003c\/strong\u003e FORM Industries is a premium manufacturer of aftermarket exterior and interior upgrades for BMW, Audi, Mercedes-Benz, Volkswagen, Porsche, Tesla, and other modern performance vehicles. Every FORM part is engineered in-house, tested against OEM fitment standards, and finished to a specification that matches — and often exceeds — the factory equivalent. From pre-preg carbon fibre through to OEM-grade gloss black, every component is built to deliver the look, feel, and longevity expected at this price point.\u003c\/p\u003e","brand":"FORM Industries","offers":[{"title":"Default Title","offer_id":55620895801684,"sku":"FO-BG8XBCCF","price":349.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1019\/0425\/3268\/files\/bmw-m2-g87-m3-g80-g81-m4-g82-g83-pre-preg-carbon-fibre-ecu-cover-by-tre-2021-tre-308653_f36a7f61-4c59-4eb0-9c7f-a174560e0fff.jpg?v=1778501643"},{"product_id":"bmw-m2-g87-m3-g80-g81-and-m4-g82-g83-pre-preg-carbon-fibre-cooling-shroud-by-form-2021","title":"BMW M2 G87, M3 G80 G81 \u0026 M4 G82 G83 Pre-Preg Carbon Fibre Cooling Shroud by FORM (2021+)","description":"\u003cp\u003eSharpen the details under the bonnet of your BMW M2 G87, M3 G80 G81 \u0026amp; M4 G82 G83 with the Pre-Preg Carbon Fibre Vehicle Dress Up Caps \u0026amp; Covers from FORM. This precision-moulded cover transforms the engine bay from a functional space into a show-ready feature, with finishing sourced to match the quality of the factory engineering underneath.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eKey Features:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDirect OEM fitment\u003c\/strong\u003e — retains factory mounting points, wiring connectors, and sensor cut-outs where applicable\u003c\/li\u003e\n\u003cli\u003eTransforms the engine bay from functional to show-ready\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAutoclave-cured pre-preg carbon fibre\u003c\/strong\u003e construction for a consistent 2x2 twill weave and show-quality clear-coat finish\u003c\/li\u003e\n\u003cli\u003eSlots or clips over the factory engine\/bay cover with no modification\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUV-stable clear coat\u003c\/strong\u003e prevents yellowing, fogging, and weave degradation over time\u003c\/li\u003e\n\u003cli\u003eBacked by \u003cstrong\u003eFORM Industries\u003c\/strong\u003e — a trusted name in OEM-level aftermarket upgrades for modern performance cars\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cstrong\u003eConstruction:\u003c\/strong\u003e Built using \u003cstrong\u003epre-preg carbon fibre\u003c\/strong\u003e — carbon cloth pre-impregnated with resin, then vacuum-bagged and autoclave-cured under precise heat and pressure. This is the same process used for OEM supercar bodywork and track-homologated race parts. The benefit over cheaper wet-layup carbon is a tighter weave, a more consistent finish, and a clear coat that won't yellow or cloud over time.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eFitment Notes:\u003c\/strong\u003e Built to suit the \u003cstrong\u003eBMW M2 G87, M3 G80 G81 \u0026amp; M4 G82 G83\u003c\/strong\u003e, model years \u003cstrong\u003e2021+\u003c\/strong\u003e. This is a direct-fit replacement or overlay depending on variant — the part matches the factory mounting pattern and panel geometry of the listed models, so a standard install is bolt-on \/ clip-on with no cutting or drilling required. If your car was built with a non-standard options pack, it's worth checking fitment with our team before ordering.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eInstallation:\u003c\/strong\u003e Fitment is straightforward for an experienced installer using standard hand tools. We strongly recommend installation by a qualified bodyshop or detailer, particularly for exterior components that require panel alignment, adhesive bonding, or painted-surface preparation. Full fitment guidance is provided in the box, and our support team can help confirm the best approach for your specific car.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eAbout FORM Industries:\u003c\/strong\u003e FORM Industries is a premium manufacturer of aftermarket exterior and interior upgrades for BMW, Audi, Mercedes-Benz, Volkswagen, Porsche, Tesla, and other modern performance vehicles. Every FORM part is engineered in-house, tested against OEM fitment standards, and finished to a specification that matches — and often exceeds — the factory equivalent. From pre-preg carbon fibre through to OEM-grade gloss black, every component is built to deliver the look, feel, and longevity expected at this price point.\u003c\/p\u003e","brand":"FORM Industries","offers":[{"title":"Default Title","offer_id":55620895867220,"sku":"FO-BG8XCSCF","price":449.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1019\/0425\/3268\/files\/bmw-m2-g87-m3-g80-g81-m4-g82-g83-pre-preg-carbon-fibre-cooling-shroud-by-tre-2021-tre-572056_0bd44157-0416-4af0-905d-b639dc0b60f8.jpg?v=1778501645"},{"product_id":"yaris-gr-pre-preg-carbon-fibre-engine-cover-by-form-2020-mk4","title":"Yaris GR Pre-Preg Carbon Fibre Engine Cover by FORM (2020+, Mk4)","description":"\u003cp\u003eTransform the engine bay presentation of your Yaris GR with the Pre-Preg Carbon Fibre Engine Cover from FORM. This direct-replacement cover turns a functional component into a styling statement.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eKey Features:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDirect OEM fitment\u003c\/strong\u003e — retains factory mounting points, wiring connectors, and sensor cut-outs where applicable\u003c\/li\u003e\n\u003cli\u003eSlots or clips over the factory engine\/bay cover with no modification\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAutoclave-cured pre-preg carbon fibre\u003c\/strong\u003e construction for a consistent 2x2 twill weave and show-quality clear-coat finish\u003c\/li\u003e\n\u003cli\u003eTransforms the engine bay from functional to show-ready\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUV-stable clear coat\u003c\/strong\u003e prevents yellowing, fogging, and weave degradation over time\u003c\/li\u003e\n\u003cli\u003eBacked by \u003cstrong\u003eFORM Industries\u003c\/strong\u003e — a trusted name in OEM-level aftermarket upgrades for modern performance cars\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cstrong\u003eMaterials \u0026amp; Construction:\u003c\/strong\u003e This component is produced from genuine \u003cstrong\u003epre-preg carbon fibre\u003c\/strong\u003e — the same autoclave-cured composite process used in Formula 1 and OEM performance parts. Unlike wet-layup or hand-laid alternatives, pre-preg delivers a tighter, more consistent weave, superior strength-to-weight ratio, and a show-finish gloss clear coat with full UV protection. The result is a part that looks as good in five years as it does on day one.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eVehicle Compatibility:\u003c\/strong\u003e Engineered for the \u003cstrong\u003eYaris GR\u003c\/strong\u003e, model years \u003cstrong\u003e2020+, Mk4\u003c\/strong\u003e. The part uses factory mounting hardware and (where relevant) existing wiring connectors, so a standard install requires no modification to your car's bodywork or wiring loom. Chassis codes matter — please confirm yours matches the listed fitment above before placing your order.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eInstallation:\u003c\/strong\u003e Fitment is straightforward for an experienced installer using standard hand tools. We strongly recommend installation by a qualified bodyshop or detailer, particularly for exterior components that require panel alignment, adhesive bonding, or painted-surface preparation. Full fitment guidance is provided in the box, and our support team can help confirm the best approach for your specific car.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eWhy FORM Industries:\u003c\/strong\u003e FORM has built a reputation among serious owners of BMW, Audi, and other modern performance cars by obsessing over the details most aftermarket brands skip — panel gap tolerances, UV-stable finishes, genuine pre-preg composite processes rather than cheaper wet-layup shortcuts, and in-house fitment testing on real cars rather than CAD models alone. The result is a range of parts that install like factory equipment and hold up the way factory equipment should.\u003c\/p\u003e","brand":"FORM Industries","offers":[{"title":"Default Title","offer_id":55620906549588,"sku":"FO-TYAECCF","price":629.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1019\/0425\/3268\/files\/yaris-gr-pre-preg-carbon-fibre-engine-cover-by-tre-2020-mk4-tre-734903_8a4f1c9e-3cb7-49a0-a3d4-e0b2d76f485a.jpg?v=1778501773"},{"product_id":"bmw-m3-g80-m4-g82-and-m2-g87-pre-preg-carbon-fibre-top-engine-bay-covers-by-form-2021","title":"BMW M3 G80, M4 G82 \u0026 M2 G87 Pre-Preg Carbon Fibre Top Engine Bay Covers by FORM (2021+)","description":"\u003cp\u003eTransform the engine bay presentation of your BMW M3 G80, M4 G82 \u0026amp; M2 G87 with the Pre-Preg Carbon Fibre Engine Bay Covers from FORM. This direct-replacement cover turns a functional component into a styling statement.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eKey Features:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDirect OEM fitment\u003c\/strong\u003e - retains factory mounting points, wiring connectors, and sensor cut-outs where applicable\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAutoclave-cured pre-preg carbon fibre\u003c\/strong\u003e construction for a consistent 2x2 twill weave and show-quality clear-coat finish\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUV-stable clear coat\u003c\/strong\u003e prevents yellowing, fogging, and weave degradation over time\u003c\/li\u003e\n\u003cli\u003eTransforms the engine bay from functional to show-ready\u003c\/li\u003e\n\u003cli\u003eSlots or clips over the factory engine\/bay cover with no modification\u003c\/li\u003e\n\u003cli\u003eBacked by \u003cstrong\u003eFORM Industries\u003c\/strong\u003e - a trusted name in OEM-level aftermarket upgrades for modern performance cars\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cstrong\u003eMaterials:\u003c\/strong\u003e Every panel is pressed in \u003cstrong\u003epre-preg carbon fibre\u003c\/strong\u003e and autoclave-cured for a dense, consistent weave and a high-gloss factory finish. The UV-stable clear coat protects against sun fade, road grime, and the surface micro-cracking that can affect lower-grade carbon parts after a few seasons of use.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eVehicle Compatibility:\u003c\/strong\u003e Engineered for the \u003cstrong\u003eBMW M3 G80, M4 G82 \u0026amp; M2 G87\u003c\/strong\u003e, model years \u003cstrong\u003e2021+\u003c\/strong\u003e. The part uses factory mounting hardware and (where relevant) existing wiring connectors, so a standard install requires no modification to your car's bodywork or wiring loom. Chassis codes matter - please confirm yours matches the listed fitment above before placing your order.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eInstallation:\u003c\/strong\u003e Fitment is straightforward for an experienced installer using standard hand tools. We strongly recommend installation by a qualified bodyshop or detailer, particularly for exterior components that require panel alignment, adhesive bonding, or painted-surface preparation. Full fitment guidance is provided in the box, and our support team can help confirm the best approach for your specific car.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eWhy FORM Industries:\u003c\/strong\u003e FORM has built a reputation among serious owners of BMW, Audi, and other modern performance cars by obsessing over the details most aftermarket brands skip - panel gap tolerances, UV-stable finishes, genuine pre-preg composite processes rather than cheaper wet-layup shortcuts, and in-house fitment testing on real cars rather than CAD models alone. The result is a range of parts that install like factory equipment and hold up the way factory equipment should.\u003c\/p\u003e","brand":"FORM Industries","offers":[{"title":"RHD","offer_id":55778408333652,"sku":"FO-BG8XEBFO","price":699.0,"currency_code":"GBP","in_stock":true},{"title":"LHD","offer_id":55778408366420,"sku":"FO-BG8XEBTL","price":679.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1019\/0425\/3268\/files\/bmw-m3-g80-m4-g82-m2-g87-pre-preg-carbon-fibre-top-engine-bay-covers-by-tre-2021-tre-142174.jpg?v=1778510109"},{"product_id":"034motorsport-billet-catch-can-kit-audi-ttrs-8j-2-5tfsi-18","title":"034Motorsport Billet Catch Can Kit Audi TTRS 8J 2.5TFSI","description":"\u003cdiv\u003e\n\u003ch2\u003e034Motorsport Billet Catch Can Kit Audi TTRS 8J 2.5TFSI\u003c\/h2\u003e\n\u003cp\u003e034Motorsport is pleased to introduce the Billet Catch Can Kit for 8J Audi TTRS 2.5 TFSI!\u003c\/p\u003e\n\u003cp\u003e034Motorsport's engineers invested significant effort developing and testing to create the most comprehensive and effective catch can kit on the market for the 2.5 TFSI motor. The 034Motorsport Billet Aluminum Catch Can Kit for 8J Audi TTRS features a completely revised high-capacity design to provide optimal crankcase ventilation while keeping oil and water vapor out of the intake tract. Furthermore, this catch can prevents oil ingestion during hard driving and heavy cornering loads seen on track. This kit is designed to drastically reduce carbon buildup within the intake tract and extended life from the motor.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePrevents Crankcase Oil Deposits in Intake Manifold and on Intake Valves\u003c\/li\u003e\n\u003cli\u003eReduces Carbon Buildup\u003c\/li\u003e\n\u003cli\u003eEnsures Proper Crankcase Ventilation\u003c\/li\u003e\n\u003cli\u003eIntegrated Dipstick for Easy Level Checks\u003c\/li\u003e\n\u003cli\u003eRetains Factory Engine Cover\u003c\/li\u003e\n\u003cli\u003eSimple Bolt-In Installation\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's Included:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCNC-Machined Billet Aluminum 034Motorsport Valve Cover Breather Fittings \u003cem\u003e(Black Anodized)\u003c\/em\u003e\n\u003c\/li\u003e\n\u003cli\u003e034Motorsport Modular Catch Can Assembly \u003cem\u003e(Black Anodized)\u003c\/em\u003e\n\u003c\/li\u003e\n\u003cli\u003e-10 AN Catch Can Inlet\/Outlet Hoses\u003c\/li\u003e\n\u003cli\u003eNo-Drill Mounting Bracket\u003c\/li\u003e\n\u003cli\u003eInstallation Hardware\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eFitment:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\u003cli\u003e2012 - 2013 Audi TTRS (8J - MkII)\u003c\/li\u003e\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNotes: \u003c\/strong\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eVehicles running catch cans in below freezing temperatures are advised to remove the catch can during winter months to avoid freeze-up issues. Race cars that need to run catch cans in freezing conditions should take extra steps to prevent freeze-up such as an electric heater or cleaning out the system regularly. Take care when routing the lines and avoid drooping, as that can allow oil\/water to collect and freeze.\u003c\/li\u003e\n\u003cli\u003eDue to the factory connection to the turbo inlet using security bolts, the turbo inlet or turbo will need to be removed from the car to uninstall the safety bolts and replace with 034Motorsport hardware and connector. Please factor in extra labor time and effort to install this catch can kit.\u003c\/li\u003e\n\u003cli\u003eThis catch can kit does not remove the factory PCV breather plate and as such is designed to catch oil expelled out of the crank case via the rear port to the turbocharger inlet. We will consider additional components to address oil leakage via the front port, however based on our testing the rear port posed the biggest source of oil exiting the crankcase under boost.\u003c\/li\u003e\n\u003cli\u003eSome rest-of-world cars reportedly have a carbon canister located where the 034Motorsport Billet Catch Can is installed. If your car has this carbon canister in this location, it will have to be removed or relocated to another spot to allow room for the 034Motorsport Billet Catch Can.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003c\/div\u003e\u003ch3\u003eAdditional Information\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e8 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eBrand\u003c\/th\u003e\n\u003ctd\u003e\u003cp\u003e034Motorsport\u003c\/p\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e \u003cp\u003e\u003cstrong\u003eFitting available:\u003c\/strong\u003e Please contact us for a quote.\u003c\/p\u003e","brand":"034Motorsport","offers":[{"title":"Default Title","offer_id":55938205876564,"sku":"034-101-1009","price":801.07,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1019\/0425\/3268\/files\/034motorsport-billet-catch-can-kit-8j-audi-ttrs-034-101-1009-3.webp?v=1779716363"},{"product_id":"034motorsport-audi-tt-rs-2-5-tfsi-8j-billet-breather-block-off-kit-21","title":"034Motorsport Audi TT RS 2.5 TFSI (8J) Billet Breather Block Off Kit","description":"\u003cdiv\u003e\n\u003cp\u003eThe Billet Breather Block Off Kit for 8J Audi TTRS 2.5 TFSI is designed to remove the \"shortcut\" for oil to directly enter the intake manifold, forcing crankcase ventilation to go through an aftermarket catch can setup and also allowing for a boost tap or intake injection point.\u003c\/p\u003e\n\u003cp\u003eOnce installed, along with the 034Motorsport Billet Catch Can, crankcase oil will not be allowed to enter the intake manifold. This will eliminate oil consumption from crankcase evacuation as well as improve combustion and prevent smoking from the tailpipe.\u003c\/p\u003e\n\u003ch3\u003eFeatures:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eCNC Machined from Billet 6061 Aluminum\u003c\/li\u003e\n\u003cli\u003eAnodized Black for Protection and Long Lasting Great Looks\u003c\/li\u003e\n\u003cli\u003e1\/8 NPT Ports to Add Sensors\u003c\/li\u003e\n\u003cli\u003eKit Removes the \"Shortcut\" for Oil to Enter Directly into the Intake Manifold\u003c\/li\u003e\n\u003cli\u003eForces CrankCase Ventilation to Go Through Catch Can Routing and Allows for Boost Tap\/ Intake Injection Point\u003c\/li\u003e\n\u003cli\u003eEasy, Fast Installation\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eReplaces:\u003c\/h3\u003e\n\u003cul\u003e\u003cli\u003e07k-103-221-E\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003eIncluded:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e(Qty. 2) Adapter Plugs (with 1\/8 NPT Plugs)\u003c\/li\u003e\n\u003cli\u003e(Qty. 2) Adapter Shell\u003c\/li\u003e\n\u003cli\u003e(Qty. 2) Adapter Retaining Clip\u003c\/li\u003e\n\u003cli\u003e(Qty. 2) O-rings\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\u003ch3\u003eAdditional Information\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e0.6 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eDimensions\u003c\/th\u003e\n\u003ctd\u003e10 x 10 x 15 cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eBrand\u003c\/th\u003e\n\u003ctd\u003e\u003cp\u003e034Motorsport\u003c\/p\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e \u003cp\u003e\u003cstrong\u003eFitting available:\u003c\/strong\u003e Please contact us for a quote.\u003c\/p\u003e","brand":"034Motorsport","offers":[{"title":"Default Title","offer_id":55938206826836,"sku":"034-101-5025","price":73.14,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1019\/0425\/3268\/files\/billet-breather-block-off-kit-8j-audi-tt-rs-2_5-tfsi-034-101-5025-1.webp?v=1779716372"},{"product_id":"034motorsport-vw-golf-mk8-gti-r-gas-bonnet-strut-34","title":"034Motorsport VW Golf MK8 GTI\/R Gas Bonnet Strut","description":"\u003cdiv\u003e\n\u003ch2\u003e034Motorsport VW Golf MK8 GTI\/R Gas Bonnet Strut\u003c\/h2\u003e\n\u003ch3\u003ePRODUCT DESCRIPTION:\u003c\/h3\u003e\n\u003cp\u003eUpset that Volkswagen left the gas hood strut off on your brand new MK8 Volkswagen Golf GTI or Golf R?\u003c\/p\u003e\n\u003cp\u003eThe 034Motorsport Gas Hood Strut allows you to replace the flimsy hood prop rod with a gas hood strut! The 034Motorsport Gas Hood Strut is designed to be the correct length and pressure for the hood of your Mk8 Volkswagen Golf GTI or Golf R.\u003c\/p\u003e\n\u003ch3\u003eFEATURES:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eEliminates the Low Budget Hood Prop Rod\u003c\/li\u003e\n\u003cli\u003eCorrect Length and Pressure for MK8 Volkswagen GTI or Golf R Hood\u003c\/li\u003e\n\u003cli\u003eOpens and Closes with the Perfect Resistance\u003c\/li\u003e\n\u003cli\u003eCNC Machined Stainless Steel Ball-End Adapter\u003c\/li\u003e\n\u003cli\u003eScrews Onto Existing Hood Latch Bracket Stud\u003c\/li\u003e\n\u003cli\u003eSimple Installation and Fully Reversible\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\u003ch3\u003eAdditional Information\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\u003ctr\u003e\n\u003cth scope=\"row\"\u003eBrand\u003c\/th\u003e\n\u003ctd\u003e\u003cp\u003e034Motorsport\u003c\/p\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\u003c\/tbody\u003e\u003c\/table\u003e \u003cp\u003e\u003cstrong\u003eFitting available:\u003c\/strong\u003e Please contact us for a quote.\u003c\/p\u003e","brand":"034Motorsport","offers":[{"title":"Default Title","offer_id":55938208137556,"sku":"034-605-0025","price":99.84,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1019\/0425\/3268\/files\/034motorsport-gas-hood-strut-mk8-volkswagen-golf-gti-golf-r-034-605-0025-034-605-0025-1.webp?v=1779716387"},{"product_id":"034motorsport-audi-ttrs-8s-billet-aluminum-engine-catch-can-kit-66","title":"034Motorsport Audi TTRS (8S) Billet Aluminum Engine Catch Can Kit","description":"\u003cdiv\u003e\n\u003cp\u003e034Motorsport's Billet Aluminum Engine Catch Can Kit is the most comprehensive and effective PCV System solution for the Audi 8S TTRS. The 034Motorsport Billet Catch Can Kit collects oil from the factory PCV system and replaces the PCV outlet to the turbo inlet. The Billet Aluminum Catch Can provides optimal crankcase ventilation while keeping oil and water vapor out of the intake track.\u003c\/p\u003e\n\u003cp\u003eThe body of the catch can is CNC milled from 6061-T6 billet aluminum and black anodized for a durable and stealthy finish. External mounting brackets are powder coated to prevent corrosion and enhance appearance. Finally, all mounting points for the Engine Catch Can are stock mounting points, which makes for an easy installation with no drilling or cutting necessary. For added convenience, there is an integrated dipstick allowing for a quick and easy way of checking levels.\u003c\/p\u003e\n\u003cp\u003eThe Billet Catch Can Kit also integrates a built-in drain system that drains all oil collected back into the turbo oil return line and the engine block. The oil collected in the catch can is perfectly safe to be drained back into the engine, allowing for service-free use!\u003c\/p\u003e\n\u003ch3\u003eFeatures:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e6061-T6 Billet Aluminum Housing\u003c\/li\u003e\n\u003cli\u003eBlack Anodized Finish for Durability and Stealth\u003c\/li\u003e\n\u003cli\u003eStainless Steel Internal Baffle Plate\u003c\/li\u003e\n\u003cli\u003ePowder Coated Vehicle Mounting Brackets\u003c\/li\u003e\n\u003cli\u003eUtilizes Available Stock Mounting Points\u003c\/li\u003e\n\u003cli\u003eTotally Reversible Installation\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eNOTE: 2019+ Vehicles Require an Extra Plug on the PCV. This is Included With Our Kit.\u003c\/p\u003e\n\u003c\/div\u003e\u003ch3\u003eAdditional Information\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e1 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eDimensions\u003c\/th\u003e\n\u003ctd\u003e30 x 40 x 20 cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eBrand\u003c\/th\u003e\n\u003ctd\u003e\u003cp\u003e034Motorsport\u003c\/p\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e \u003cp\u003e\u003cstrong\u003eFitting available:\u003c\/strong\u003e Please contact us for a quote.\u003c\/p\u003e","brand":"034Motorsport","offers":[{"title":"Default Title","offer_id":55938215215444,"sku":"034-101-1014","price":739.54,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1019\/0425\/3268\/files\/034motorsport-billet-aluminum-engine-catch-can-kit-for-audi-8v5-rs3-audi-8s-ttrs-034-101-1014-15-1.webp?v=1779716452"},{"product_id":"034motorsport-vag-s3-golf-8v-8v-5-mk7-r-stage-2-billet-catch-can-kit-awd-67","title":"034Motorsport VAG S3\/Golf (8V\/8V.5\/Mk7 R) Stage 2 Billet Catch Can Kit (AWD)","description":"\u003cdiv\u003e\n\u003cp\u003eThe 034Motorsport Stage 2 Billet Catch Can Kit is the ultimate PCV replacement for hardcore track enthusiasts and street drivers alike, featuring both the 034Motorsport Catch Can and Valve Cover Breather Assembly, CNC machined from 6061-T6 aluminum billet. The 034Motorsport Valve Cover Breather Assembly utilizes a built-in baffle plate to prevent oil from surging into the cylinder head, which the stock valve cover breather assembly fails to do. When paired with our catch can, this kit harmoniously ensures the intercooler and inlet tracts stay clear of pesky oil build-up, solving blow-by issues through proper crankcase ventilation. This pairing allows clean airflow throughout the intake manifold, resulting in an increased lifespan of your motor and a smoke-free experience on the race track!\u003c\/p\u003e\n\u003cp\u003eThe Billet Catch Can Kit also includes a Catch Can Oil Drain Kit, allowing for service-free use of the catch can by draining collected oil back into the oil drain line of the turbocharger.\u003c\/p\u003e\n\u003cp\u003ePushing the EA888 Gen3 2.0T hard on track under high-G braking and cornering commonly results in large pools of oil collecting within the cylinder head. Due to an inherent design flaw in the factory PCV system, the pooled oil can escape through the check valve and into the combustion chamber, causing an enormous puff of blue\/gray smoke to come out of the tailpipes under harsh braking or hard turning. This can lead to severe consequences such as shorter engine life, avoidable oil consumption, and oil starvation due to rapid oil consumption.\u003c\/p\u003e\n\u003ch3\u003eValve cover breather assembly efficiency:\u003c\/h3\u003e\n\u003cp\u003eA critical feature of a valve cover breather assembly is the ability to relieve pressure within the crankcase. Oftentimes, competitors tout their baffle system ensures proper crankcase pressure ventilation, but most owners often find themselves with blown seals due to inadequate ventilation under the harshest conditions. This issue is caused by a poorly designed baffle plate with unnecessarily tight tolerances, hindering the performance of the PCV system rather than improving it. The 034Motorsport Stage 2 Billet Valve Cover Breather Assembly has a properly designed baffle plate that prevents large quantities of oil from splashing out of the cylinder head, while allowing for restriction-free airflow for crankcase pressure, ensuring that the crankcase does not build up unnecessary pressure during high-performance usage.\u003c\/p\u003e\n\u003ch3\u003eCatch can:\u003c\/h3\u003e\n\u003cp\u003eThe 034Motorsport Billet Catch Can is included in the Stage 2 Billet Catch Can Kit captures and stores all unwanted vapors from the valve cover breather assembly. For added convenience, there is an integrated dipstick allowing for a quick and easy way of checking levels.\u003c\/p\u003e\n\u003ch3\u003eFeatures:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSimple Bolt-In Installation\u003c\/li\u003e\n\u003cli\u003eMachined From 6061-T6 Aluminum Billet\u003c\/li\u003e\n\u003cli\u003eAnodized Black for Protection Long-Lasting Good Looks\u003c\/li\u003e\n\u003cli\u003eIntegrated Dipstick for Easy Level Checks\u003c\/li\u003e\n\u003cli\u003eThe Built-In Baffle Plate Allows Proper Crankcase Ventilation Without Oil Surging.\u003c\/li\u003e\n\u003cli\u003eEnsures Proper Crankcase Ventilation\u003c\/li\u003e\n\u003cli\u003eEliminates Potential Boost Leak at PCV Assembly\u003c\/li\u003e\n\u003cli\u003eEliminates The \"Giant Puff of Smoke\" That Occurs on Track With the Stock Unit\u003c\/li\u003e\n\u003cli\u003eCatches Unwanted Oil and Water Vapor From Being Burnt\u003c\/li\u003e\n\u003cli\u003eKeeps the Intercooler and Inlet Tracts Clear of Oil Build-Up, and Provides Clean Airflow Through The Inlet Manifold.\u003c\/li\u003e\n\u003cli\u003ePrevents Oil Deposits in Intake Manifold and On Intake Valves\u003c\/li\u003e\n\u003cli\u003eService-Free Use with Catch Can Oil Drain Kit!\u003c\/li\u003e\n\u003cli\u003eReduces Carbon Buildup\u003c\/li\u003e\n\u003cli\u003eRetains Factory Engine Cover\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's included:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eCNC-Machined Billet Aluminum 034Motorsport Valve Cover Breather Fittings (Black Anodized)\u003c\/li\u003e\n\u003cli\u003e034Motorsport Modular Catch Can Assembly (Black Anodized)\u003c\/li\u003e\n\u003cli\u003e-10 AN Catch Can Inlet\/Outlet Hoses\u003c\/li\u003e\n\u003cli\u003eNo-Drill Mounting Bracket\u003c\/li\u003e\n\u003cli\u003eVC PCV Breather Adapter Assembly\u003c\/li\u003e\n\u003cli\u003eCatch Can Oil Drain Kit\u003c\/li\u003e\n\u003cli\u003eInstallation Hardware\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\u003ch3\u003eAdditional Information\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e2 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eDimensions\u003c\/th\u003e\n\u003ctd\u003e40 x 30 x 20 cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eBrand\u003c\/th\u003e\n\u003ctd\u003e\u003cp\u003e034Motorsport\u003c\/p\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e \u003cp\u003e\u003cstrong\u003eFitting available:\u003c\/strong\u003e Please contact us for a quote.\u003c\/p\u003e","brand":"034Motorsport","offers":[{"title":"Default Title","offer_id":55938215674196,"sku":"034-101-1020","price":888.15,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1019\/0425\/3268\/files\/stage-2-billet-catch-can-kit-8v-8v_5-audi-s3-mk7-mk7_5-vw-golf-r-awd-034-101-1020-1-1.webp?v=1779716457"},{"product_id":"034motorsport-audi-rs3-8v-5-billet-aluminum-engine-catch-can-kit-69","title":"034Motorsport Audi RS3 (8V.5) Billet Aluminum Engine Catch Can Kit","description":"\u003cdiv\u003e\n\u003cp\u003e034Motorsport's Billet Aluminum Engine Catch Can Kit is the most comprehensive and effective PCV System solution for the Audi 8V.5 RS3. The 034Motorsport Billet Catch Can Kit collects oil from the factory PCV system and replaces the PCV outlet to the turbo inlet. The Billet Aluminum Catch Can provides optimal crankcase ventilation while keeping oil and water vapor out of the intake track.\u003c\/p\u003e\n\u003cp\u003eThe body of the catch can is CNC milled from 6061-T6 billet aluminum and black anodized for a durable and stealthy finish. External mounting brackets are powder coated to prevent corrosion and enhance appearance. Finally, all mounting points for the Engine Catch Can are stock mounting points, which makes for an easy installation with no drilling or cutting necessary. For added convenience, there is an integrated dipstick allowing for a quick and easy way of checking levels.\u003c\/p\u003e\n\u003cp\u003eThe Billet Catch Can Kit also integrates a built-in drain system that drains all oil collected back into the turbo oil return line and the engine block. The oil collected in the catch can is perfectly safe to be drained back into the engine, allowing for service-free use!\u003c\/p\u003e\n\u003ch3\u003eFeatures:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e6061-T6 Billet Aluminum Housing\u003c\/li\u003e\n\u003cli\u003eBlack Anodized Finish for Durability and Stealth\u003c\/li\u003e\n\u003cli\u003eStainless Steel Internal Baffle Plate\u003c\/li\u003e\n\u003cli\u003ePowder Coated Vehicle Mounting Brackets\u003c\/li\u003e\n\u003cli\u003eUtilizes Available Stock Mounting Points\u003c\/li\u003e\n\u003cli\u003eTotally Reversible Installation\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eNOTE: 2019+ Vehicles Require an Extra Plug on the PCV. This is Included With Our Kit.\u003c\/p\u003e\n\u003c\/div\u003e\u003ch3\u003eAdditional Information\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e1 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eDimensions\u003c\/th\u003e\n\u003ctd\u003e30 x 40 x 20 cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eBrand\u003c\/th\u003e\n\u003ctd\u003e\u003cp\u003e034Motorsport\u003c\/p\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e \u003cp\u003e\u003cstrong\u003eFitting available:\u003c\/strong\u003e Please contact us for a quote.\u003c\/p\u003e","brand":"034Motorsport","offers":[{"title":"Default Title","offer_id":55938216001876,"sku":"034-101-1015","price":739.54,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1019\/0425\/3268\/files\/034motorsport-billet-aluminum-engine-catch-can-kit-for-audi-8v5-rs3-audi-8s-ttrs-034-101-1014-15-1_470542bd-36d0-4290-93b9-518b4cd1f789.webp?v=1779716462"},{"product_id":"034motorsport-audi-b8-b8-5-c7-3-0-tfsi-supercharger-190mm-crank-pulley-upgrade-71","title":"034Motorsport Audi (B8\/B8.5\/C7) 3.0 TFSI Supercharger 190mm Crank Pulley Upgrade","description":"\u003cdiv\u003e\n\u003cp\u003eThe 034Motorsport 3.0 TFSI Supercharger 190mm Crank Pulley Upgrade for the B8\/B8.5 Audi S4\/S5\/Q5\/SQ5 \u0026amp; C7 Audi A6\/A7 is an easy way to increase supercharger rotational speed to provide more boost to your engine. This kit works with both the OEM supercharger pulley and the 034Motorsport 3.0 TFSI Supercharger Pulley Upgrade.\u003c\/p\u003e\n\u003cp\u003eThe 034Motorsport 3.0 TFSI Supercharger 190mm Crank Pulley Upgrade is machined from a single piece of 6061-T6 billet aluminum, and black anodized for an attractive finish resistant to corrosion. This design is 62% lighter than the OE pulley, significantly reducing rotational weight and parasitic loss. This is a single piece inner and outer pulley, not a pulley \"overlay\", which adds rotational weight.\u003c\/p\u003e\n\u003cp\u003eWhen used as the only pulley upgrade, this kit is an easy upgrade that can be used with the Dynamic+ B8\/B8.5 3.0 TFSI Performance Software Stage 2 tune. When used in conjunction with the 034Motorsport 3.0 TFSI Supercharger Pulley Upgrade, the Dynamic+ B8\/B8.5 3.0 TFSI Performance Software Stage 2+ tune is recommended.\u003c\/p\u003e\n\u003ch3\u003eSupercharger rotational speed increases:\u003c\/h3\u003e\n\u003cp\u003eThe following chart shows how the relationship between supercharger RPM relative to engine RPM changes with different pulley combinations.\u003c\/p\u003e\n\u003cp\u003e\u003cimg alt=\"034motorsport 3. 0 tfsi supercharger 190mm pulley upgrade supercharger speed\" async height=\"521\" src=\"title=\" audi tfsi supercharger crank pulley upgrade width=\"591\"\u003e\u003c\/p\u003e\n\u003cp\u003e034Motorsport 3.0 TFSI Supercharger 190mm Pulley Upgrade Supercharger Speed\u003c\/p\u003e\n\u003ch3\u003eFeatures:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMachined from a Single Piece of 6061-T6 Billet Aluminum\u003c\/li\u003e\n\u003cli\u003eBlack Anodized with Laser Engraving for a Durable Finish\u003c\/li\u003e\n\u003cli\u003eReduced Parasitic Loss - 62% Lighter than Stock\u003c\/li\u003e\n\u003cli\u003eComplete Inner and Outer Pulley, Not Just a Pulley \"Overlay\", Which Adds Weight\u003c\/li\u003e\n\u003cli\u003eCan be Used Instead of Upper Pulley for an Easy Stage 2 Install\u003c\/li\u003e\n\u003cli\u003eCan be Used Along with Upper Pulley for Stage 2+\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's included:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e034Motorsport B8 3.0 TFSI 190mm Crank Pulley\u003c\/li\u003e\n\u003cli\u003eContinental 1320mm Crank Pulley V-Belt\u003c\/li\u003e\n\u003cli\u003eM8x1.25x25mm Class 12.9 Zinc Coated Socket Head Cap Screws (qty 8)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\u003ch3\u003eAdditional Information\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e0.6 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eDimensions\u003c\/th\u003e\n\u003ctd\u003e19 x 19 x 15 cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eBrand\u003c\/th\u003e\n\u003ctd\u003e\u003cp\u003e034Motorsport\u003c\/p\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e \u003cp\u003e\u003cstrong\u003eFitting available:\u003c\/strong\u003e Please contact us for a quote.\u003c\/p\u003e","brand":"034Motorsport","offers":[{"title":"Default Title","offer_id":55938216427860,"sku":"034-145-Z042","price":531.73,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1019\/0425\/3268\/files\/034-145-z042-1.webp?v=1779716467"},{"product_id":"034motorsport-audi-rs3-ttrs-8v-5-8s-engine-cover-grommets-82","title":"034Motorsport Audi RS3\/TTRS (8V.5\/8S) Engine Cover Grommets","description":"\u003cdiv\u003e\n\u003cp\u003eA tuned Audi 2.5TFSI EVO DAZA engine in the Audi 8V.5 RS3 or 8S TTRS makes so much power that the acceleration rips the engine's face right off! Keep your engine cover where it belongs by replacing the OE rubber engine cover grommets with 034Motorsport's Density Line Engine Cover Grommets. The higher durometer rubber retains the engine cover in its proper location regardless of how hard the car can be launched. The stiffer rubber and thicker rubber flange also prevents the engine cover grommets from pushing through the grommet hole and falling out.\u003c\/p\u003e\n\u003ch3\u003eFeatures:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eStiffer Rubber and Thicker Flange Design Resists Engine Cover Grommets from Pushing Through and Becoming Lost\u003c\/li\u003e\n\u003cli\u003eHigher Durometer Rubber Keeps Engine Cover in Place\u003c\/li\u003e\n\u003cli\u003eEasy to Install\u003c\/li\u003e\n\u003cli\u003eReplaces Missing\/Lost Factory Pieces\u003c\/li\u003e\n\u003cli\u003eDirect Replacement for Factory Grommet 1T0 805 673 A\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\u003ch3\u003eAdditional Information\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e0.3 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eDimensions\u003c\/th\u003e\n\u003ctd\u003e16 x 4 x 5 cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eBrand\u003c\/th\u003e\n\u003ctd\u003e\u003cp\u003e034Motorsport\u003c\/p\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e \u003cp\u003e\u003cstrong\u003eFitting available:\u003c\/strong\u003e Please contact us for a quote.\u003c\/p\u003e","brand":"034Motorsport","offers":[{"title":"Default Title","offer_id":55938216722772,"sku":"034-1ZZ-1002","price":37.15,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1019\/0425\/3268\/files\/034-1zz-1002-1_1.webp?v=1779716471"},{"product_id":"034motorsport-2-0tsi-2-5tfsi-3-0tfsi-supercharged-high-pressure-fuel-pump-piston-upgrade-kit-85","title":"034Motorsport 2.0TSI \/ 2.5TFSI \/ 3.0TFSI Supercharged High Pressure Fuel Pump Piston Upgrade Kit","description":"\u003cdiv\u003e\n\u003cp\u003eThe 034Motorsport High Pressure Fuel Pump Piston Upgrade Kit, 2.0TSI, 2.5TFSI, 3.0TFSI Supercharged is designed to be a drop-in replacement piston for the factory high pressure fuel pump for the Gen 2 EA888 2.0 TSI engines in the B8\/B8.5 Audi A4\/Allroad \u0026amp; A5, the 2.5 TFSI in the 8J Audi TTRS, and the EA837 3.0T TFSI Supercharged equipped B8\/B8.5 Audi S4\/ S5\/Q5\/SQ5 and C7 Audi A6\/A7.\u003c\/p\u003e\n\u003cp\u003eBy upgrading the factory high pressure fuel pump with the 034Motorsport High Pressure Fuel Pump Piston Upgrade Kit, 2.0TSI, 2.5TFSI, 3.0TFSI Supercharged, the factory fueling limits are raised by up to 50% in 2.0T, 2.5T, or 3.0T engines. This increased flow allows the fuel system to meet the higher demands for ethanol, race gas, more pump gas, and pairs perfectly with all Dynamic+ ECU software that requires an upgraded High Pressure Fuel Pump!\u003c\/p\u003e\n\u003ch3\u003eFeatures:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eYields up to 50% Flow Increase Over the Factory High Pressure Fuel Pump\u003c\/li\u003e\n\u003cli\u003eIncreased Piston Diameter\u003c\/li\u003e\n\u003cli\u003eRaises the Factory Fueling Limits Present in 2.0T, 2.5T, and 3.0T Engines\u003c\/li\u003e\n\u003cli\u003eIncreased Flow to Meet the Demands of E85 Optimized Tunes\u003c\/li\u003e\n\u003cli\u003eRequired for Most Stage 2+ Performance Software\u003c\/li\u003e\n\u003cli\u003eFuel Pump Internals Precision-Machined to Aerospace Tolerances\u003c\/li\u003e\n\u003cli\u003eDLC Coated Piston and Cylinder for Reduced Friction and Increased Performance\u003c\/li\u003e\n\u003cli\u003eMatched Piston and Cylinder for Absolute Precision\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eIncluded:\u003c\/h3\u003e\n\u003cul\u003e\u003cli\u003e1x Pump Piston \u0026amp; Cylinder Set\u003c\/li\u003e\u003c\/ul\u003e\n\u003c\/div\u003e\u003ch3\u003eAdditional Information\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e0.9 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eDimensions\u003c\/th\u003e\n\u003ctd\u003e15 x 8 x 6 cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eBrand\u003c\/th\u003e\n\u003ctd\u003e\u003cp\u003e034Motorsport\u003c\/p\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e \u003cp\u003e\u003cstrong\u003eFitting available:\u003c\/strong\u003e Please contact us for a quote.\u003c\/p\u003e","brand":"034Motorsport","offers":[{"title":"Default Title","offer_id":55938217083220,"sku":"034-106-6052","price":429.56,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1019\/0425\/3268\/files\/034motorsport-high-pressure-fuel-pump-piston-upgrade-kit-2.0tsi_-2.5tfsi-3_0tfsi-supercharged-034-106-6052-7.jpg?v=1779716476"},{"product_id":"034motorsport-superduper-charger-84mm-throttle-body-system-b8-b8-5-audi-s4-s5-3-0tfsi-124","title":"034Motorsport SuperDuper Charger 84mm Throttle Body System, B8\/B8.5 Audi S4\/S5 3.0TFSI","description":"\u003cdiv\u003e\n\u003ch3\u003ePRODUCT DESCRIPTION:\u003c\/h3\u003e\n\u003cp\u003eSignificant effort went into developing this comprehensive performance-improving throttle body upgrade solution for the supercharged 3.0 TFSI engine found in the B8 and B8.5 generation of S4 and S5. The 034Motorsport SuperDuper Charger 84mm Throttle Body System offers an easy bolt-on solution to those looking to maximize performance and flow!.\u003c\/p\u003e\n\u003cp\u003eThe 034Motorsport SuperDuper Charger utilizes a VDO 84mm throttle body mated to a cast and machined aluminum throttle body adapter, offering a smooth transition between the larger throttle body to the supercharger inlet. This results in a 20% increase in flow over the OE throttle body right out of the box. Additionally, the throttle body adapter and gasket can be port matched to the supercharger during supercharger porting, allowing for increased airflow.\u003c\/p\u003e\n\u003cp\u003e034Motorsport Dynamic+ Tuning is required to safely run this SuperDuper Charger 84mm Throttle Body System. Files to support this upgraded hardware are included with our Stage 2+ 91, 93, 100, 104, \u0026amp; E40 octane options free of charge. Simply select the file designated with SuperDuper and you're good to go! NOTE: This is only for Stage 2+ files. We do not have Stage 1 or Stage 2 files for the SuperDuper Charger.\u003c\/p\u003e\n\u003ch3\u003e\n\u003cspan\u003e034MOTORSPORT SUPERDUPER CHARGER 84MM THROTTLE BODY SYSTEM, B8\/B8.5 AUDI S4\/S5 3.0TFSI\u003c\/span\u003e DYNO CHARTS\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eSelect Dyno Chart:\u003c\/strong\u003e\u003cbr\u003eCrank Power\u003cbr\u003eWheel Power\u003cbr\u003eCrank Gains\u003cbr\u003eBoost Pressure Gains\u003cbr\u003ePressure Drop\u003cbr\u003e \u003c\/p\u003e\n\u003cdiv\u003e\u003cimg alt=\"Dyno chart\" async src=\"title=\" superduper charger throttle body system b8 audi s4\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cdiv\u003e\u003cdiv\u003e\u003cdiv\u003e\n\u003ch3\u003eFEATURES:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eCast and Machined A356 Aluminum Throttle Body Adapter\u003c\/li\u003e\n\u003cli\u003eUpgrades to a VDO 84mm Throttle Body\u003c\/li\u003e\n\u003cli\u003eImproved Flow Where the Stock Throttle Body Becomes Restrictive\u003c\/li\u003e\n\u003cli\u003e20% Increase in Flow Over the OE Throttle Body\u003c\/li\u003e\n\u003cli\u003e\u003cul\u003e\n\u003cli\u003eStock 70mm : 380 CFM\u003c\/li\u003e\n\u003cli\u003e034Motorsport 84mm with Adapter: 457 CFM\u003c\/li\u003e\n\u003c\/ul\u003e\u003c\/li\u003e\n\u003cli\u003eOEM BMW V8 Throttle Body for Reliability and Long Lasting Performance\u003c\/li\u003e\n\u003cli\u003eSmooth Transition from the Large Throttle Body to the Supercharger Inlet\u003c\/li\u003e\n\u003cli\u003eThrottle Body Adapter and Gasket Can be Port Matched to the Supercharger During Supercharger Porting, Allowing Even More Flow\u003c\/li\u003e\n\u003cli\u003eWire-Reinforced Multi-Ply Silicone Hose\u003c\/li\u003e\n\u003cli\u003e\u003cul\u003e\n\u003cli\u003eMaintains Smooth Inside Surface for Optimum Flow\u003c\/li\u003e\n\u003cli\u003eNylon Breather Tube Connection Nipple\u003c\/li\u003e\n\u003c\/ul\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\u003c\/div\u003e\u003c\/div\u003e\u003c\/div\u003e\n\u003ch3\u003eWHAT'S INCLUDED:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e84mm VDO Throttle Body\u003c\/li\u003e\n\u003cli\u003eThrottle Body Adapter\u003c\/li\u003e\n\u003cli\u003eSilicone Hose\u003c\/li\u003e\n\u003cli\u003eWiring Harness Adapter\u003c\/li\u003e\n\u003cli\u003eAdapter to Supercharger Gasket\u003c\/li\u003e\n\u003cli\u003eAll Necessary Hardware\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eREPLACES OE PART NUMBERS:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e06E 133 062 H\u003c\/li\u003e\n\u003cli\u003e06E 133 062 G\u003c\/li\u003e\n\u003cli\u003e06E 133 062 C\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eNOTES:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eIncluded with the SuperDuper Charger 84mm Throttle Body System is our wire-reinforced multi-ply silicone hose. This hose is designed to be mated with X34 Carbon Fiber Intake if you already have our intake system. If you do not have our X34 Carbon Fiber Intake, you can purchase the full SuperDuper Insuction Bundle (COMING SOON).\u003c\/li\u003e\n\u003cli\u003eThis kit will not work with stock intake\u003c\/li\u003e\n\u003cli\u003eModifications may be necessary to make the system work with other aftermarket intakes, or stock intake.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eEMISSIONS DISCLAIMER:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eThis product is sold for racing use as well as use on vehicles not registered for on highway use.\u003c\/li\u003e\n\u003cli\u003eBy purchasing this product, you understand that this product is sold for racing use as well as used on vehicles not registered for on highway use, and that it is not legal for use on highway or street vehicles.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\u003ch3\u003eAdditional Information\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e10 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eDimensions\u003c\/th\u003e\n\u003ctd\u003e100 x 80 x 60 cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eBrand\u003c\/th\u003e\n\u003ctd\u003e\u003cp\u003e034Motorsport\u003c\/p\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e \u003cp\u003e\u003cstrong\u003eFitting available:\u003c\/strong\u003e Please contact us for a quote.\u003c\/p\u003e","brand":"034Motorsport","offers":[{"title":"Default Title","offer_id":55938225865044,"sku":"034-108-1902","price":803.4,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1019\/0425\/3268\/files\/034motorsport-superduper-charger-throttle-body-adapter-034-108-1902-1-e1695894202537.webp?v=1779716547"},{"product_id":"034motorsport-x34-evo-intake-adapter-for-2019-audi-8v-5-rs3-and-8s-ttrs-146","title":"034Motorsport X34 EVO Intake Adapter for 2019+ Audi 8V.5 RS3 and 8S TTRS","description":"\u003cdiv\u003e\n\u003ch3\u003ePRODUCT DESCRIPTION:\u003c\/h3\u003e\n\u003cp\u003eThose that are looking to upgrade the intake on a 2019+ Audi RS3 or TTRS will notice their diverter valve hose is a different design than those on earlier model vehicles. Without an adapter, intakes for earlier versions of these vehicles will not fit. The X34 Evo Intake Adapter, constructed out of 6061-T6 billet aluminum, allows for easy conversion to the new OEM diverter valve style. The included 3-ply reinforced molded silicone hose ensures that your intake system stays sealed under all conditions and pressures. With a simple bolt-on design, the installation of the adapter is a breeze!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNOTE:\u003c\/strong\u003e This product is not necessary for 2017-2018 RS3's and TTRS's as they do not utilize the bolt-on hose style for the diverter valve outlet. This product is \u003cstrong\u003erequired\u003c\/strong\u003e for 2019+ models with the bolt-on hose style.\u003c\/p\u003e\n\u003ch3\u003eWHAT'S INCLUDED:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eBillet 6061-T6 Aluminum CNC Machined X34 Inlet Hose Adapter\u003c\/li\u003e\n\u003cli\u003eX34 Silicone Inlet Hose\u003c\/li\u003e\n\u003cli\u003eM20x32 Worm Drive Clamp x2\u003c\/li\u003e\n\u003cli\u003e1\/8 NPT Plug\u003c\/li\u003e\n\u003cli\u003e25x2.5mm Viton O-Ring\u003c\/li\u003e\n\u003cli\u003e12x2.0mm Viton O-Ring\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eREQUIRED HARDWARE:\u003c\/h3\u003e\n\u003cp\u003eThis item must be used with one of the following 2.5TFSI EVO DAZA intake systems\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e034-108-1014: X34 Carbon Fiber Closed Top CAI\u003c\/li\u003e\n\u003cli\u003e034-108-1015: X34 Carbon Fiber Open Top CAI\u003c\/li\u003e\n\u003cli\u003e034-108-1025: X34 Carbon Fiber Open Top Intake Bundle\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNOTE:\u003c\/strong\u003e This kit should also work with other manufacturers intake systems designed for the earlier years of the Audi 8V.5 RS3 and 8S TTRS.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\u003ch3\u003eAdditional Information\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e5 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eDimensions\u003c\/th\u003e\n\u003ctd\u003e40 x 40 x 40 cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e \u003cp\u003e\u003cstrong\u003eFitting available:\u003c\/strong\u003e Please contact us for a quote.\u003c\/p\u003e","brand":"034Motorsport","offers":[{"title":"Default Title","offer_id":55938234909012,"sku":"034-108-Z074","price":75.46,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1019\/0425\/3268\/files\/034-108-z074-1-e1697708149184.webp?v=1779716615"},{"product_id":"034motorsport-audi-b9-a4-s4-carbon-fiber-radiator-support-159","title":"034Motorsport Audi B9 A4\/S4 Carbon Fiber Radiator Support","description":"\u003cdiv\u003e\n\u003ch2\u003e034Motorsport Audi B9 A4\/S4 Carbon Fiber Radiator Support\u003c\/h2\u003e\n\u003ch3\u003ePRODUCT DESCRIPTION:\u003c\/h3\u003e\n\u003cp\u003e034Motorsport's Carbon Fiber Radiator Cover for the B9\/B9.5 Audi A4\/S4 is designed to tastefully complement the factory engine bay with a beautiful carbon fiber weave that is perfectly matched to our X34 Carbon Fiber Audi B9\/B9.5 S4 Air Intake.\u003c\/p\u003e\n\u003cp\u003eThis genuine carbon fiber cover is a direct replacement for the plastic factory radiator cover, utilizing the factory Audi mounting provisions, for a true OEM+ appearance.\u003c\/p\u003e\n\u003ch3\u003eFEATURES:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eOEM+ Carbon Fiber Quality and Fitment\u003c\/li\u003e\n\u003cli\u003eVery Easy to Install and Completely Reversible\u003c\/li\u003e\n\u003cli\u003eMatches other OEM and 034Motorsport Carbon Fiber Weaves\u003c\/li\u003e\n\u003cli\u003eBeautifully Compliments the Engine Bay\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWHAT'S INCLUDED:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eCarbon Fiber Radiator Support Cover\u003c\/li\u003e\n\u003cli\u003eAuthentic 034Motorsport Product Holographic Decal\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\u003ch3\u003eAdditional Information\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e5 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eBrand\u003c\/th\u003e\n\u003ctd\u003e\u003cp\u003e034Motorsport\u003c\/p\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e \u003cp\u003e\u003cstrong\u003eFitting available:\u003c\/strong\u003e Please contact us for a quote.\u003c\/p\u003e","brand":"034Motorsport","offers":[{"title":"Default Title","offer_id":55938238316884,"sku":"034-1ZZ-1005","price":337.84,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1019\/0425\/3268\/files\/carbon_fiber_radiator_support_cover__for_audi_b9_a4s4_034-1zz-1005-1.webp?v=1779716647"},{"product_id":"034motorsport-audi-8v-rs3-and-8s-ttrs-carbon-fiber-engine-cover-162","title":"034Motorsport Audi 8V RS3 and 8S TTRS Carbon Fiber Engine Cover","description":"\u003cdiv\u003e\n\u003ch2\u003e034Motorsport Audi 8V RS3 and 8S TTRS Carbon Fiber Engine Cover\u003c\/h2\u003e\n\u003ch3\u003ePRODUCT DESCRIPTION:\u003c\/h3\u003e\n\u003cp\u003e034Motorsport's Carbon Fiber Engine Cover Overlay for the 8V Audi RS3 \u0026amp; 8S Audi TTRS is designed to tastefully complement the factory engine bay with a beautiful carbon fiber weave that is perfectly matched to our X34 Carbon Fiber Audi RS3\/TTRS Air Intake systems as well as the OEM carbon fiber plate cover on the intake plenum (Sport Plus Package).\u003c\/p\u003e\n\u003cp\u003eThis genuine carbon fiber cover is an overlay for the plastic factory engine cover, retaining the factory Audi 'RS' logo for a true OEM+ appearance. Simply install using the preinstalled, high-strength, vehicle grade 3M VHB Double-Sided tape. This is guaranteed to keep the carbon cover seated and secure to your OEM engine cover through anything you throw at it!\u003c\/p\u003e\n\u003cp\u003eCompatible with both OEM Carbon and Non-Carbon engine covers, and completely reversible. Spruce up your engine bay today!\u003c\/p\u003e\n\u003ch3\u003eFEATURES:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eCarbon Fiber Weave Matches Other OEM and 034 Carbon Fiber Weaves\u003c\/li\u003e\n\u003cli\u003eRetains the Factory Audi 'RS' logo for OEM+ Appearance\u003c\/li\u003e\n\u003cli\u003e034 Logo included uninstalled in box (early models are preinstalled but can be easily removed) for customer choice of branded or OEM+ style aesthetics\u003c\/li\u003e\n\u003cli\u003eEasy Install with 3M VHB Double-Sided Tape\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWHAT'S INCLUDED:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e034Motorsport Carbon Fiber DAZA Engine Cover\u003c\/li\u003e\n\u003cli\u003ePreinstalled 3M VHB Double-Sided Tape Strips for Easy Install\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\u003ch3\u003eAdditional Information\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e5 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eBrand\u003c\/th\u003e\n\u003ctd\u003e\u003cp\u003e034Motorsport\u003c\/p\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e \u003cp\u003e\u003cstrong\u003eFitting available:\u003c\/strong\u003e Please contact us for a quote.\u003c\/p\u003e","brand":"034Motorsport","offers":[{"title":"Default Title","offer_id":55938238644564,"sku":"034-1ZZ-0009","price":514.31,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1019\/0425\/3268\/files\/engine_cover_carbon__fiber_overlay_audi_8v5_rs3_8s_ttrs_034-1zz-0009-1.webp?v=1779716653"},{"product_id":"034motorsport-carbon-fiber-engine-cover-vw-mk7-mk7-5-golf-gti-golf-r-163","title":"034Motorsport Carbon Fiber Engine Cover VW Mk7 \u0026 Mk7.5 Golf GTI \u0026 Golf R","description":"\u003cdiv\u003e\n\u003ch2\u003e034Motorsport Carbon Fiber Engine Cover VW Mk7 \u0026amp; Mk7.5 Golf GTI \u0026amp; Golf R\u003c\/h2\u003e\n\u003cp\u003e034Motorsport's Carbon Fiber Engine Cover Overlay for the Mk7 \u0026amp; MK7.5 Golf, GTI, \u0026amp; Golf R is designed to tastefully complement the factory engine bay with a beautiful carbon fiber weave that is perfectly matched to all other 034Motorsport Carbon Fiber components, such as our X34 Intake System.\u003c\/p\u003e\n\u003cp\u003eThis genuine carbon fiber is an overlay for the plastic factory engine cover, retaining the factory logos for an OEM+ appearance. Simply install using the preinstalled, high-strength, vehicle grade 3M VHB Double-Sided tape. This is guaranteed to keep the carbon cover seated and secure to your OEM engine cover through anything you throw at it!\u003c\/p\u003e\n\u003ch3\u003eFEATURES:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eCarbon Fiber Weave Matches Other OEM and 034 Carbon Fiber Weaves\u003c\/li\u003e\n\u003cli\u003eRetains the Factory logos for OEM+ Appearances\u003c\/li\u003e\n\u003cli\u003eRetains factory cover which fits well and insulates sound\u003c\/li\u003e\n\u003cli\u003eForm fitting shape holds the factory cover securely\u003c\/li\u003e\n\u003cli\u003e034 Logo included uninstalled in box for customer choice of branded or OEM+ style aesthetics\u003c\/li\u003e\n\u003cli\u003eEasy Install with 3M VHB Double-Sided Tape\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWHAT'S INCLUDED:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e034Motorsport Carbon Fiber Cover Overlay for the Mk7 \u0026amp; Mk7.5 VW Golf, GTI, \u0026amp; Golf R\u003c\/li\u003e\n\u003cli\u003ePreinstalled 3M VHB Double-Sided Tape Strips for Easy Install\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\u003ch3\u003eAdditional Information\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e5 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eBrand\u003c\/th\u003e\n\u003ctd\u003e\u003cp\u003e034Motorsport\u003c\/p\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e \u003cp\u003e\u003cstrong\u003eFitting available:\u003c\/strong\u003e Please contact us for a quote.\u003c\/p\u003e","brand":"034Motorsport","offers":[{"title":"Default Title","offer_id":55938239070548,"sku":"034-1ZZ-0005","price":323.91,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1019\/0425\/3268\/files\/carbon-fiber-engine-cover-mk7-mk75-vw-golf-gti-golf-034-1zz-0005-01.webp?v=1779716658"},{"product_id":"034motorsport-audi-s3-8v-tts-8s-carbon-fiber-engine-cover-164","title":"034Motorsport Audi S3 8V\/TTS 8S Carbon Fiber Engine Cover","description":"\u003cdiv\u003e\n\u003ch2\u003e034Motorsport Audi S3 8V\/TTS 8S Carbon Fiber Engine Cover\u003c\/h2\u003e\n\u003cp\u003e034Motorsport's Carbon Fiber Engine Cover for the 8V Audi S3 \u0026amp; 8S Audi TTS is designed to tastefully complement the factory engine bay with a beautiful carbon fiber weave that is perfectly matched to the X34 Carbon Fiber Audi S3\/TTS Air Intake.\u003c\/p\u003e\n\u003cp\u003eThis genuine carbon fiber cover is an overlay for the plastic factory engine cover, retaining the factory Audi rings and TFSI logo for a true OEM+ appearance.\u003c\/p\u003e\n\u003cdiv\u003e\u003cstrong\u003eCompatible Vehicles:\u003c\/strong\u003e\u003c\/div\u003e\n\u003cul\u003e\n\u003cli\u003e2015 - Present Audi S3 (8V - MQB)\u003c\/li\u003e\n\u003cli\u003e2016 - Present Audi TTS (MkIII - MQB)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePlease Note:\u003c\/strong\u003e This engine cover can also be installed on other platforms equipped with the EA888 Gen 3 2.0T engine if the S3\/TTS engine cover has been retrofitted.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWarranty:\u003c\/strong\u003e All 034Motorsport products are covered by our industry-leading 1 Year Warranty against defects in materials or workmanship. The 1 Year Warranty does not cover natural discoloration or cosmetic imperfections on carbon fiber finishes which occur over time.\u003c\/p\u003e\n\u003c\/div\u003e\u003ch3\u003eAdditional Information\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e5 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eBrand\u003c\/th\u003e\n\u003ctd\u003e\u003cp\u003e034Motorsport\u003c\/p\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e \u003cp\u003e\u003cstrong\u003eFitting available:\u003c\/strong\u003e Please contact us for a quote.\u003c\/p\u003e","brand":"034Motorsport","offers":[{"title":"Default Title","offer_id":55938239398228,"sku":"034-1ZZ-0003","price":444.65,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1019\/0425\/3268\/files\/034motorsport-carbon-fiber-engine-cover-audi-8v-a3-s3-8s-tt-tts-volkswagen-mkvii-golf-r-gti-mqb-034-1zz-0003-1.webp?v=1779716663"},{"product_id":"034motorsport-3-0-tfsi-supercharger-179mm-crank-pulley-upgrade-b8-b8-5-audi-s4-s5-q5-sq5-c7-audi-a6-a7-168","title":"034Motorsport 3.0 TFSI Supercharger 179mm Crank Pulley Upgrade, B8\/B8.5 Audi S4\/S5\/Q5\/SQ5 \u0026 C7 Audi A6\/A7","description":"\u003cdiv\u003e\n\u003ch1\u003e\u003cspan\u003e034Motorsport 3.0 TFSI Supercharger 179mm Crank Pulley Upgrade, B8\/B8.5 Audi S4\/S5\/Q5\/SQ5 \u0026amp; C7 Audi A6\/A7\u003c\/span\u003e\u003c\/h1\u003e\n\u003ch3\u003ePRODUCT DESCRIPTION\u003c\/h3\u003e\n\u003cp\u003eThe 034Motorsport 3.0 TFSI Supercharger 179mm Crank Pulley Upgrade for the B8\/B8.5 Audi S4\/S5\/Q5\/SQ5 \u0026amp; C7 Audi A6\/A7 is an easy way to increase supercharger rotational speed to provide more boost to your engine. This kit works with both the OEM supercharger pulley and the 034Motorsport 3.0 TFSI Supercharger Pulley Upgrade.\u003c\/p\u003e\n\u003cp\u003eThe 034Motorsport 3.0 TFSI Supercharger 179mm Crank Pulley Upgrade is machined from a single piece of 6061-T6 billet aluminum, and black anodized for an attractive finish resistant to corrosion. This design is 64% lighter than the OE pulley, significantly reducing rotational weight and parasitic loss. This is a single piece inner and outer pulley, not a pulley \"overlay\", which adds rotational weight.\u003c\/p\u003e\n\u003cp\u003eTuning Required\u003c\/p\u003e\n\u003ch3\u003eSUPERCHARGER ROTATIONAL SPEED INCREASES:\u003c\/h3\u003e\n\u003cp\u003eThe following chart shows how the relationship between supercharger RPM relative to engine RPM changes with different pulley combinations.\u003c\/p\u003e\n\u003cdiv\u003e\u003cimg alt=\"034motorsport 3. 0 tfsi supercharger 179mm pulley upgrade supercharger speed\" async src=\"title=\" tfsi supercharger crank pulley upgrade b8 audi s4 c7 a6 width=\"600\"\u003e\u003c\/div\u003e\n\u003ch3\u003eFEATURES:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMachined from a Single Piece of 6061-T6 Billet Aluminum\u003c\/li\u003e\n\u003cli\u003eBlack Anodized with Laser Engraving for a Durable Finish\u003c\/li\u003e\n\u003cli\u003eReduced Parasitic Loss - 64% Lighter than Stock\u003c\/li\u003e\n\u003cli\u003eComplete Inner and Outer Pulley, Not Just a Pulley \"Overlay\", Which Adds Weight\u003c\/li\u003e\n\u003cli\u003eCan be Used Instead of Upper Pulley for an Easy Stage 2 Install\u003c\/li\u003e\n\u003cli\u003eCan be Used Along with Upper Pulley for Stage 2+\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWHAT'S INCLUDED:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e034Motorsport B8 3.0 TFSI 179mm Crank Pulley\u003c\/li\u003e\n\u003cli\u003eContinental 1290mm Crank Pulley V-Belt\u003c\/li\u003e\n\u003cli\u003eM8x1.25x25mm Class 12.9 Zinc Coated Socket Head Cap Screws (qty 8)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\u003ch3\u003eAdditional Information\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e8 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eBrand\u003c\/th\u003e\n\u003ctd\u003e\u003cp\u003e034Motorsport\u003c\/p\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e \u003cp\u003e\u003cstrong\u003eFitting available:\u003c\/strong\u003e Please contact us for a quote.\u003c\/p\u003e","brand":"034Motorsport","offers":[{"title":"Default Title","offer_id":55938240119124,"sku":"034-145-Z045","price":531.73,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1019\/0425\/3268\/files\/3-0-tfsi-supercharger-179mm-crank-pulley-upgrade-b8-b8-5-audi-s4-s5-q5-sq5-c7-audi-a6-a7-034-145-z045-1.webp?v=1779716671"},{"product_id":"034motorsport-3-0-tfsi-supercharger-pulley-upgrade-b8-b8-5-audi-s4-s5-q5-sq5-c7-audi-a6-a7-169","title":"034Motorsport 3.0 TFSI Supercharger Pulley Upgrade B8\/B8.5 Audi S4\/S5\/Q5\/SQ5 \u0026 C7 Audi A6\/A7","description":"\u003cdiv\u003e\n\u003ch1\u003e\u003cspan\u003e034Motorsport 3.0 TFSI Supercharger Pulley Upgrade, B8\/B8.5 Audi S4\/S5\/Q5\/SQ5 \u0026amp; C7 Audi A6\/A7\u003c\/span\u003e\u003c\/h1\u003e\n\u003cp\u003e034Motorsport is proud to offer this high-quality Supercharger Pulley Upgrade for the B8\/B8.5 Audi S4\/S5\/Q5\/SQ5 \u0026amp; C7\/C7.5 Audi A6\/A7 3.0T FSI!\u003c\/p\u003e\n\u003cp\u003eAt 57.70mm in diameter, the 034Motorsport 3.0 TFSI Supercharger Pulley is significantly smaller than the factory unit in order to increase the drive ratio of the supercharger. Spinning the supercharger faster yields increased boost pressure throughout the RPM range, resulting in increased horsepower and torque throughout the powerband when paired with Stage 2 Performance Software.\u003c\/p\u003e\n\u003cp\u003e034Motorsport's Supercharger Pulley Upgrade is meant for use with Stage 2 Performance Software, and is engineered to keep the Eaton TVS 1320 Supercharger within its maximum recommended supercharger speed with a 7,200 RPM redline.\u003c\/p\u003e\n\u003ch3\u003eWHAT'S INCLUDED:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e034Motorsport Supercharger Pulley\u003c\/li\u003e\n\u003cli\u003eNew Continental Replacement Belt\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFITMENT:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e2010 - 2017 Audi S4 3.0 TFSI (B8\/B8.5)\u003c\/li\u003e\n\u003cli\u003e2013 - 2017 Audi S5 3.0 TFSI (B8.5)\u003c\/li\u003e\n\u003cli\u003e2011 - 2015 Audi Q7 3.0 TFSI (4L)\u003c\/li\u003e\n\u003cli\u003e2010 - 2017 Audi Q5\/SQ5 3.0 TFSI (B8\/B8.5)\u003c\/li\u003e\n\u003cli\u003e2012 - 2017 Audi A6 3.0 TFSI (C7)\u003c\/li\u003e\n\u003cli\u003e2012 - 2017 Audi A7 3.0 TFSI (C7)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\u003ch3\u003eAdditional Information\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e8 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eBrand\u003c\/th\u003e\n\u003ctd\u003e\u003cp\u003e034Motorsport\u003c\/p\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e \u003cp\u003e\u003cstrong\u003eFitting available:\u003c\/strong\u003e Please contact us for a quote.\u003c\/p\u003e","brand":"034Motorsport","offers":[{"title":"Default Title","offer_id":55938240348500,"sku":"034-145-Z034","price":217.1,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1019\/0425\/3268\/files\/034motorsport-supercharger-pulley-kit-b8-audi-s4-30t-034-145-z034-4.webp?v=1779716676"},{"product_id":"034motorsport-billet-catch-can-kit-8v-audi-a3-mkvii-volkswagen-gti-170","title":"034Motorsport Billet Catch Can Kit, 8V Audi A3 \u0026 MkVII Volkswagen GTI","description":"\u003cdiv\u003e\n\u003ch2\u003e034Motorsport Billet Catch Can Kit, 8V Audi A3 \u0026amp; MkVII Volkswagen GTI\u003c\/h2\u003e\n\u003cp\u003e034Motorsport is pleased to introduce the Billet Catch Can Kit for 8V Audi A3 \u0026amp; MkVII Volkswagen GTI!\u003c\/p\u003e\n\u003cp\u003e034Motorsport's engineers invested significant effort developing and testing to create the most comprehensive and effective catch can kit on the market for the 2.0T EA888 Gen 3 motor. The 034Motorsport Billet Aluminum Catch Can Kit for 8V Audi A3 \u0026amp; MkVII Volkswagen GTI features a completely revised high-capacity design to provide optimal crankcase ventilation while keeping oil and water vapor out of the intake track. Furthermore, this catch can prevents oil ingestion during hard driving and heavy cornering loads seen on track. This kit is designed to prevent oil from depositing in the intake manifold and intake valves, resulting in drastically reduced carbon buildup and extended life from the motor.\u003c\/p\u003e\n\u003cp\u003eThe Billet Catch Can Kit also includes a Catch Can Oil Drain Kit, allowing for service-free use of the catch can by draining collected oil back into the oil drain line of the turbocharger.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePrevents Crankcase Oil Deposits in Intake Manifold and on Intake Valves\u003c\/li\u003e\n\u003cli\u003eReduces Carbon Buildup\u003c\/li\u003e\n\u003cli\u003eEnsures Proper Crankcase Ventilation\u003c\/li\u003e\n\u003cli\u003eEliminates Potential Boost Leak at PCV Assembly\u003c\/li\u003e\n\u003cli\u003eIntegrated Dipstick for Easy Level Checks\u003c\/li\u003e\n\u003cli\u003eRetains Factory Engine Cover\u003c\/li\u003e\n\u003cli\u003eService-Free Use with Catch Can Oil Drain Kit!\u003c\/li\u003e\n\u003cli\u003eSimple Bolt-In Installation\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's Included:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCNC-Machined Billet Aluminum 034Motorsport Valve Cover Breather Fittings \u003cem\u003e(Black Anodized)\u003c\/em\u003e\n\u003c\/li\u003e\n\u003cli\u003e034Motorsport Modular Catch Can Assembly \u003cem\u003e(Black Anodized)\u003c\/em\u003e\n\u003c\/li\u003e\n\u003cli\u003e-10 AN Catch Can Inlet\/Outlet Hoses\u003c\/li\u003e\n\u003cli\u003eWindshield Washer Filler Relocation\u003c\/li\u003e\n\u003cli\u003eCatch Can Oil Drain Kit\u003c\/li\u003e\n\u003cli\u003eNo-Drill Mounting Bracket\u003c\/li\u003e\n\u003cli\u003eInstallation Hardware\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNote: \u003c\/strong\u003eVehicles running catch cans in below freezing temperatures are advised to remove the catch can during winter months to avoid freeze-up issues. Race cars that need to run catch cans in freezing conditions should take extra steps to prevent freeze-up such as an electric heater or cleaning out the system regularly. Take care when routing the lines and avoid drooping, as that can allow oil\/water to collect and freeze.\u003c\/p\u003e\n\u003c\/div\u003e\u003ch3\u003eAdditional Information\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e8 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eBrand\u003c\/th\u003e\n\u003ctd\u003e\u003cp\u003e034Motorsport\u003c\/p\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e \u003cp\u003e\u003cstrong\u003eFitting available:\u003c\/strong\u003e Please contact us for a quote.\u003c\/p\u003e","brand":"034Motorsport","offers":[{"title":"Default Title","offer_id":55938240577876,"sku":"034-101-1007","price":665.24,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1019\/0425\/3268\/files\/034motorsport-billet-aluminum-catch-can-kit-mkvii-volkswagen-golf-gti-8v-audi-a3-034-101-1007-1-1.webp?v=1779716681"},{"product_id":"034motorsport-mk5-gti-mk6r-s3-ea113-2-0t-fsi-catch-can-kit-185","title":"034Motorsport MK5 GTI\/MK6R\/S3 EA113 2.0T FSI Catch Can Kit","description":"\u003cdiv\u003e\n\u003ch3\u003e034Motorsport MK5 GTI\/MK6R\/S3 EA113 2.0T FSI Catch Can Kit\u003c\/h3\u003e\n\u003ch4\u003eProduct Description:\u003c\/h4\u003e\n\u003cp\u003eThe 034Motorsport Transverse EA113 2.0T FSI Catch Can Kit is here! 034 has put months of engineering and testing to create the most complete and effective catch can kit on the market. The 034Motorsport Transverse EA113 2.0T FSI Catch Can Kit features a completely new proprietary catch can, as well as a CNC machined valve cover breather adapter to provide optimal crankcase ventilation while keeping oil and water vapour out of the intake tract. This kit is designed to prevent oil from depositing in the intake manifold and intake valves, resulting in drastically reduced carbon buildup and extended life of the intake manifold flapper assembly.\u003c\/p\u003e\n\u003ch3\u003eFeatures:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eComplete PCV System Replacement\u003c\/li\u003e\n\u003cli\u003ePrevents Crankcase Oil Deposits in Intake Manifold and on Intake Valves\u003c\/li\u003e\n\u003cli\u003eReduces Carbon Buildup\u003c\/li\u003e\n\u003cli\u003eEnsures Proper Crankcase Ventilation\u003c\/li\u003e\n\u003cli\u003eEliminates Potential Boost Leak at PCV Assembly\u003c\/li\u003e\n\u003cli\u003eRetains Factory Engine Cover\u003c\/li\u003e\n\u003cli\u003eIntegrated Dipstick for Easy Inspection\u003c\/li\u003e\n\u003cli\u003e100% Bolt-In Installation\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's Included:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eCNC-Machined Billet Aluminum 034Motorsport Valve Cover Breather Adapter \u003cem\u003e(Black Anodized)\u003c\/em\u003e\n\u003c\/li\u003e\n\u003cli\u003e034Motorsport Modular Catch Can Assembly \u003cem\u003e(Black Anodized)\u003c\/em\u003e\n\u003c\/li\u003e\n\u003cli\u003e-10 AN Catch Can Inlet\/Outlet Hoses\u003c\/li\u003e\n\u003cli\u003eNo-Drill Mounting Bracket\u003c\/li\u003e\n\u003cli\u003eIntake Manifold Plug \u0026amp; Boost Tap\u003c\/li\u003e\n\u003cli\u003eInstallation Hardware\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e2006 - 2008 Audi TT \/ TT-S (8J)\u003cul\u003e\u003cli\u003e2.0T FSI\u003c\/li\u003e\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e2006 - 2008 Audi A3\/S3 (8P)\u003cul\u003e\u003cli\u003e2.0T FSI\u003c\/li\u003e\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e2006 - 2008 Volkswagen Eos \/ GLI \/ GTI (MkV)\u003cul\u003e\u003cli\u003e2.0T FSI\u003c\/li\u003e\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e2012 Volkswagen Golf R (MkVI)\u003cul\u003e\u003cli\u003e2.0T FSI\u003c\/li\u003e\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePlease Note:\u003c\/strong\u003e Some RoW and RHD vehicles may have a charcoal canister mounted on the engine mount bracket. This will need to be relocated for installation of the 034Motorsport Catch Can.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eDoes not fit vehicles with the later 2.0 TSI chain-drive engine.\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/div\u003e\u003ch3\u003eAdditional Information\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e4 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eDimensions\u003c\/th\u003e\n\u003ctd\u003e30 x 30 x 30 cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eBrand\u003c\/th\u003e\n\u003ctd\u003e\u003cp\u003e034Motorsport\u003c\/p\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e \u003cp\u003e\u003cstrong\u003eFitting available:\u003c\/strong\u003e Please contact us for a quote.\u003c\/p\u003e","brand":"034Motorsport","offers":[{"title":"Default Title","offer_id":55938243297620,"sku":"034-101-1011","price":571.2,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1019\/0425\/3268\/files\/034motorsport-billet-aluminum-catch-can-kit-mkv-mkvi-volkswagen-20t-fsi-golf-gti-jetta-gli-8j-8p-audi-tt-tts-a3-034-101-1011-01_1.webp?v=1779716714"},{"product_id":"oil-catch-tank-kit-for-mk6-golf-gti-scirocco-and-skoda-octavia-fmctmk6","title":"Oil Catch Tank Kit for Mk6 Golf GTI, Scirocco, and Skoda Octavia","description":"\u003cp\u003eThis oil catch tank kit is the product of many months of intensive research and development by our in-house development team, and the end result is by far the most complete oil collection system currently on the market. Not only is it beautifully designed, it has been created to capture the maximum amount of harmful contaminants, including oil deposits, unused fuel vapours and moisture, all of which would ordinarily make their way back through to the inlet of the engine.\u003c\/p\u003e\r\n\r\n\u003cp\u003eExtensive testing has proven our oil catch tank kit's ability to effectively reduce sludge and carbon build up, in turn allowing the Golf Mk6 GTI's TSI engine to both breathe and perform more efficiently. It can therefore be viewed as a genuine performance enhancing product and one we recommend any Mk6 GTI owner seriously consider, particularly if they are planning more advanced power tuning at a later date.\u003c\/p\u003e\r\n\r\n\u003cp\u003e \u003c\/p\u003e\r\n\r\n\u003cp\u003e\u003ciframe allow=\"accelerometer; autoplay; encrypted-media; gyroscope; picture-in-picture\" allowfullscreen=\"\" frameborder=\"0\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/4TSDFCRwcQY\" width=\"560\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\r\n\r\n\u003cp\u003eThe 0.4l (400cc) catch tank boasts a slew of features intended to make it both easy to check and simple to drain, including a dipstick for level inspection and a well placed drain tap.\u003c\/p\u003e\r\n\r\n\u003cp\u003e\u003cimg alt=\"\" src=\"\/userfiles\/images\/website_imgs\/FMCTMK6-INTERNALS-WEB.jpg\"\u003e\u003c\/p\u003e\r\n\r\n\u003cp\u003e \u003c\/p\u003e\r\n\r\n\u003cp\u003e \u003c\/p\u003e\r\n\r\n\u003cp\u003eThe design of the kit has also been carefully considered, hence its inner tube which is constructed from anti-static smooth fuel resistant nitrile rubber. This is paired with an outer cover made from reinforced stainless steel wire braid (a Forge specialty), specifically a partial inner braid and a full cover outer braid. We developed this complex arrangement in order for the tank to be resistant to both pressure expansion and vacuum collapse, and also to enable the kit to function within a clearly defined temperature range – 54°C to +150°C (-65°F to 300°F)\u003c\/p\u003e\r\n\r\n\u003cp\u003e \u003c\/p\u003e\r\n\r\n\u003cp\u003eFinally, the kit features a pair of stainless steel reinforced oil resistant hoses with black external braiding, which combine with the supplied fittings to form an OEM-looking product when installed, so much so that the engine cover can still be clipped into place!\u003c\/p\u003e\r\n\r\n\u003cp\u003e \u003c\/p\u003e\r\n\r\n\u003cp\u003e \u003c\/p\u003e\r\n\r\n\u003cp\u003e\u003cspan\u003e\u003cu\u003e\u003cstrong\u003eHighlights\u003c\/strong\u003e\u003c\/u\u003e\u003c\/span\u003e\u003c\/p\u003e\r\n\r\n\u003cp\u003e\u003cstrong\u003e0.4L capacity*\u003c\/strong\u003e\u003c\/p\u003e\r\n\r\n\u003cp\u003e\u003cstrong\u003eA drain tap for ease of emptying.\u003c\/strong\u003e\u003c\/p\u003e\r\n\r\n\u003cp\u003e\u003cstrong\u003eA dipstick for simple level inspection.\u003c\/strong\u003e\u003c\/p\u003e\r\n\r\n\u003cp\u003e\u003cstrong\u003e2 Quality stainless steel reinforced oil resistant hoses with black external braiding for that inconspicuous look. \u003c\/strong\u003e\u003c\/p\u003e\r\n\r\n\u003cp\u003e\u003cstrong\u003eFully assembled with fittings to suit the OEM connections.\u003c\/strong\u003e\u003c\/p\u003e\r\n\r\n\u003cp\u003e\u003cstrong\u003eInner tube is constructed from anti-static smooth fuel resistant nitrile rubber\u003c\/strong\u003e\u003c\/p\u003e\r\n\r\n\u003cp\u003e\u003cstrong\u003eOuter cover is constructed from reinforced Stainless Steel wire braid consisting of partial inner braid \u0026amp; full cover outer braiding which is resistant to pressure\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFitting available:\u003c\/strong\u003e Please contact us for a quote.\u003c\/p\u003e","brand":"Forge Motorsport","offers":[{"title":"Default Title","offer_id":55938979758420,"sku":"FMCTMK6","price":402.56,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1019\/0425\/3268\/files\/Forge_Motorsport_Oil_Catch_Tank_Kit_for_Mk6_Golf_GTI__53528.jpg?v=1779723579"},{"product_id":"oil-catch-tank-kit-for-20-tsi-tiguan-fmcttig","title":"Oil Catch Tank Kit for 2.0 Tsi Tiguan","description":"\u003cp\u003eThis oil catch tank kit is the product of many months of intensive research and development by our in-house development team, and the end result is by far the most complete oil collection system currently on the market. Not only is it beautifully designed, it has been created to capture the maximum amount of harmful contaminants, including oil deposits, unused fuel vapours and moisture, all of which would ordinarily make their way back through to the inlet of the engine.\u003c\/p\u003e\r\n\r\n\u003cp\u003eExtensive testing has proven our oil catch tank kit's ability to effectively reduce sludge and carbon build up, in turn allowing the Tiguan 2.0 TSI engine to both breathe and perform more efficiently. It can therefore be viewed as a genuine performance enhancing product and one we recommend any owner seriously consider, particularly if they are planning more advanced power tuning at a later date.\u003c\/p\u003e\r\n\r\n\u003cp\u003eThe 0.4l (400cc) catch tank boasts a slew of features intended to make it both easy to check and simple to drain, including a dipstick for level inspection and a well placed drain tap.\u003c\/p\u003e\r\n\r\n\u003cp\u003eThe design of the kit has also been carefully considered, hence its inner tube which is constructed from anti-static smooth fuel resistant nitrile rubber. This is paired with an outer cover made from reinforced stainless steel wire braid (a Forge specialty), specifically a partial inner braid and a full cover outer braid. We developed this complex arrangement in order for the tank to be resistant to both pressure expansion and vacuum collapse, and also to enable the kit to function within a clearly defined temperature range – 54°C to +150°C (-65°F to 300°F)\u003c\/p\u003e\r\n\r\n\u003cp\u003eFinally, the kit features a pair of stainless steel reinforced oil resistant hoses with black external braiding, which combine with the supplied fittings to form an OEM-looking product when installed, so much so that the engine cover can still be clipped into place!\u003c\/p\u003e\r\n\r\n\u003cp\u003e \u003c\/p\u003e\r\n\r\n\u003cp align=\"center\"\u003e\u003cstrong\u003e\u003cu\u003eHighlights\u003c\/u\u003e\u003c\/strong\u003e\u003c\/p\u003e\r\n\r\n\u003cp align=\"center\"\u003e\u003cstrong\u003e0.4L capacity*\u003cbr\u003e\r\nA drain tap for ease of emptying\u003cbr\u003e\r\nA dipstick for simple level inspection\u003cbr\u003e\r\n2 Quality stainless steel reinforced oil resistant hoses with black external braiding for that inconspicuous look\u003cbr\u003e\r\nFully assembled with fittings to suit the OEM connections\u003cbr\u003e\r\nInner tube is constructed from anti-static smooth fuel resistant nitrile rubber\u003cbr\u003e\r\nOuter cover is constructed from reinforced Stainless Steel wire braid consisting of partial inner braid \u0026amp; full cover outer braiding which is resistant to pressure expansion and vacuum collapse\u003cbr\u003e\r\nTemperature Range: -54°C to +150°C\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFitting available:\u003c\/strong\u003e Please contact us for a quote.\u003c\/p\u003e","brand":"Forge Motorsport","offers":[{"title":"Default Title","offer_id":55938979791188,"sku":"FMCTTIG","price":402.56,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1019\/0425\/3268\/files\/Oil_Catch_Tank_Kit_for_20_Tsi_Tiguan_80098.jpg?v=1779723580"},{"product_id":"catch-tank-for-audi-s4s5-b9-fmct4","title":"Catch Tank for Audi S4\/S5 B9","description":"\u003cp\u003eThis oil catch tank kit is the product of many months of intensive research and development by our in-house development team, and the end result is by far the most complete oil collection system currently on the market. Not only is it beautifully designed, it has been created to capture the maximum amount of harmful contaminants, including oil deposits, unused fuel vapours and moisture, all of which would ordinarily make their way back through to the inlet of the engine.\u003c\/p\u003e\r\n\r\n\u003cp\u003eExtensive testing has proven our oil catch tank’s ability to effectively reduce sludge and carbon build up, in turn allowing the Audi S4 B9 3.0T engine to both breathe and perform more efficiently. It can therefore be viewed as a genuine performance enhancing product and one we recommend any owner of this vehicle seriously consider, particularly if they are planning more advanced power tuning at a later date.\u003c\/p\u003e\r\n\r\n\u003cp\u003eThe 0.4l (400cc) catch tank boasts a slew of features intended to make it both easy to check and simple to drain, including a dipstick for level inspection and a well-placed drain tap.\u003c\/p\u003e\r\n\r\n\u003cp\u003eThe design of the hose kit has also been carefully considered, hence its inner tube which is constructed from anti-static smooth fuel resistant nitrile rubber. This is paired with an outer cover made from reinforced stainless steel wire braid (a Forge specialty), specifically a partial inner braid and a full cover outer braid. We developed this complex arrangement in order for the tank to be resistant to both pressure expansion and vacuum collapse, and also to enable the kit to function within a clearly defined temperature range -54°C to +150°C (-65°F to 300°F)\u003c\/p\u003e\r\n\r\n\u003cp\u003eFinally, the kit features a pair of stainless steel reinforced oil resistant hoses with black external braiding, which combine with the supplied fittings to form an OEM-looking product when installed, so much so that the engine cover can still be clipped into place!\u003c\/p\u003e\r\n\r\n\u003cp\u003e \u003c\/p\u003e\r\n\r\n\u003cp align=\"center\"\u003e\u003cstrong\u003e\u003cu\u003eHighlights\u003c\/u\u003e\u003c\/strong\u003e\u003c\/p\u003e\r\n\r\n\u003cp align=\"center\"\u003e\u003cstrong\u003e0.4L capacity*\u003c\/strong\u003e\u003c\/p\u003e\r\n\r\n\u003cp align=\"center\"\u003e\u003cstrong\u003eA drain tap for ease of emptying.\u003c\/strong\u003e\u003c\/p\u003e\r\n\r\n\u003cp align=\"center\"\u003e\u003cstrong\u003eA dipstick for simple level inspection.\u003c\/strong\u003e\u003c\/p\u003e\r\n\r\n\u003cp align=\"center\"\u003e\u003cstrong\u003e2 Quality stainless steel reinforced oil resistant hoses with black external braiding for that inconspicuous look.\u003c\/strong\u003e\u003c\/p\u003e\r\n\r\n\u003cp align=\"center\"\u003e\u003cstrong\u003eFully assembled with fittings to suit the OEM connections.\u003c\/strong\u003e\u003c\/p\u003e\r\n\r\n\u003cp align=\"center\"\u003e\u003cstrong\u003eInner tube is constructed from anti-static smooth fuel resistant nitrile rubber\u003c\/strong\u003e\u003c\/p\u003e\r\n\r\n\u003cp align=\"center\"\u003e\u003cstrong\u003eOuter cover is constructed from reinforced Stainless Steel wire braid consisting of partial inner braid \u0026amp; full cover outer braiding which is resistant to pressure expansion and vacuum\n\u003cp\u003e\u003cstrong\u003eFitting available:\u003c\/strong\u003e Please contact us for a quote.\u003c\/p\u003e\u003c\/strong\u003e\u003c\/p\u003e","brand":"Forge Motorsport","offers":[{"title":"Default Title","offer_id":55938979823956,"sku":"FMCT4","price":368.63,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1019\/0425\/3268\/files\/Catch_Tank_for_Audi_S4_B9_86621jpeg.jpg?v=1779723581"},{"product_id":"oil-catch-can-kit-for-vw-golf-mk7-gtir-vw-jetta-mk7-gli-amp-audi-s3-8v-fmctmk7","title":"Oil Catch Can Kit For VW Golf Mk7 GTI\/R, VW Jetta MK7 GLI, \u0026 Audi S3 (8V)","description":"\u003cp\u003eFollowing on from the success of our billet catch can kit for the Golf Mk5 and Golf Mk6, we are pleased to present another of our kits for the Golf Mk7 GTI \u0026amp; R, VW Jetta Mk7 GLI, and Audi S3 (8V).\u003c\/p\u003e\r\n\r\n\u003cp\u003e\u003cstrong\u003e\u003cu\u003eHighlights\u003c\/u\u003e\u003c\/strong\u003e\u003c\/p\u003e\r\n\r\n\u003cul\u003e\r\n\t\u003cli\u003eComplete kit solution with downloadable step by step instruction guide\u003c\/li\u003e\r\n\t\u003cli\u003e0.4L capacity*\u003c\/li\u003e\r\n\t\u003cli\u003eTemperature Range: -54°C to +150°C (-65°F to 300°F)\u003c\/li\u003e\r\n\t\u003cli\u003eEmptying made easier with the included drain tap\u003c\/li\u003e\r\n\t\u003cli\u003eA dipstick for simple level inspection.\u003c\/li\u003e\r\n\t\u003cli\u003eDipstick level set just below 0.4L for optimal breathing\u003c\/li\u003e\r\n\t\u003cli\u003eCompatible with engine cover, so it can stay in place following installation\u003c\/li\u003e\r\n\t\u003cli\u003eHigh quality, stainless steel hoses with black braiding\u003c\/li\u003e\r\n\t\u003cli\u003eHoses are resistant to pressure expansion and vacuum collapse\u003c\/li\u003e\r\n\t\u003cli\u003eHose end fittings used are compatible with the OEM connections\u003c\/li\u003e\r\n\t\u003cli\u003eInner tube of the hose is constructed from anti-static, smooth, fuel resistant nitrile rubber.\u003c\/li\u003e\r\n\t\u003cli\u003eHose outer cover is constructed from reinforced stainless-steel wire braid, consisting of partial inner braid \u0026amp; full cover outer braiding.\u003c\/li\u003e\r\n\t\u003cli\u003eYou will not need to modify any original equipment which means this kit is fully reversible.\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\r\n\u003cdiv\u003e\r\n\u003cdiv\u003e\r\n\u003cp\u003e\u003cimg alt=\"\" src=\"\/userfiles\/Products\/FMCTMK7\/FMCTMK7-ENGINE-BAY-VARIATIONS-1.jpg\"\u003e\u003c\/p\u003e\r\n\u003c\/div\u003e\r\n\r\n\u003cdiv\u003e\r\n\u003cp\u003e\u003cimg alt=\"\" src=\"\/userfiles\/Products\/FMCTMK7\/FMCTMK7-ENGINE-BAY-VARIATIONS-2.jpg\"\u003e\u003c\/p\u003e\r\n\u003c\/div\u003e\r\n\u003c\/div\u003e\r\n\r\n\u003cp\u003eIn house testing has proven that our oil catch can assist in helping the engine breathe and perform more efficiently by reducing the carbon build up. We would recommend for any owner to seriously consider this product, not only if they are planning on increasing the power of the vehicle, but also to prolong the efficiency of the vehicle’s engine. Knowing that this is a serviceable part that will need emptying on occasion (time period will vary depending on use) we wanted to make it as user friendly as possible. This thought process is what led to us incorporating both the drain tap and dipstick, after various versions being trialled, we are very pleased with the simple yet effective solution.\u003c\/p\u003e\r\n\r\n\u003cp\u003e\u003cstrong\u003ePlease note, this part will only fit if you have OEM engine mounts. This will not fit those vehicles with uprated engine mounts.\u003c\/strong\u003e\u003c\/p\u003e\r\n\r\n\u003cp\u003eUsing the 35+ years of inherent knowledge within the business we worked on how to combine a presentable and tidy aesthetic with functionality and reliability. This resulted in a lines made up of an anti-static, smooth, fuel resistant, nitrile rubber inner tube and a reinforced, stainless steel, black, wire braided outer cover. The outer layer of the stainless steel comprises of a partial inner braid and a fuller outer braid, meaning it will not be effected by vacuum collapse or pressure expansion.\u003c\/p\u003e\r\n\r\n\u003cdiv\u003e\r\n\u003cdiv\u003e\r\n\u003cp\u003e\u003cimg alt=\"\" src=\"https:\/\/www.forgemotorsport.co.uk\/userfiles\/images\/sys\/products\/Oil_Catch_Can_Kit_For_VW_Golf_MK7_GTI_Audi_S3_43442jpeg.jpg\"\u003e\u003c\/p\u003e\r\n\u003c\/div\u003e\r\n\r\n\u003cdiv\u003e\r\n\u003cp\u003e\u003cimg alt=\"\" src=\"https:\/\/www.forgemotorsport.co.uk\/userfiles\/images\/sys\/products\/Oil_Catch_Can_Kit_For_VW_Golf_MK7_GTI_Audi_S3_76756jpeg.jpg\"\u003e\u003c\/p\u003e\r\n\u003c\/div\u003e\r\n\r\n\u003cdiv\u003e\r\n\u003cp\u003e\u003cimg alt=\"\" src=\"https:\/\/www.forgemotorsport.co.uk\/userfiles\/images\/sys\/products\/Oil_Catch_Can_Kit_For_VW_Golf_MK7_GTI_Audi_S3_26689jpeg.jpg\"\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cp\u003e\u003cstrong\u003eFitting available:\u003c\/strong\u003e Please contact us for a quote.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Forge Motorsport","offers":[{"title":"Yes","offer_id":55938979856724,"sku":"FMCTMK7-WB","price":413.67,"currency_code":"GBP","in_stock":true},{"title":"No","offer_id":55938979889492,"sku":"FMCTMK7","price":370.79,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1019\/0425\/3268\/files\/Oil_Catch_Can_Kit_For_VW_Golf_MK7_GTI_Audi_S3_43442jpeg.jpg?v=1779723582"},{"product_id":"catch-can-for-audi-ttrs-8s-and-rs3-8v-fmct3","title":"Catch Can for Audi TTRS (8S) and RS3 (8V)","description":"\u003cp\u003eThis oil catch tank kit is for the Audi TTRS 8S and Audi RS3 (8V) 2017-on, developed by our in-house development team. Not only is it beautifully designed, it has been \u003cstrong\u003ecreated to capture the maximum amount of harmful contaminants\u003c\/strong\u003e, including oil deposits, unused fuel vapours and moisture, all of which would ordinarily make their way back through to the inlet of the engine.\u003c\/p\u003e\r\n\r\n\u003cp\u003eExtensive testing has proven our oil catch tank kit's ability to effectively reduce sludge and carbon build up, in turn allowing the engine to both breathe and perform more efficiently. It can therefore be viewed as a \u003cstrong\u003egenuine performance enhancing product\u003c\/strong\u003e and one we recommend, particularly if you are planning more advanced power tuning at a later date.\u003c\/p\u003e\r\n\r\n\u003cdiv\u003e\r\n\u003cdiv\u003e\r\n\u003cp\u003e\u003cimg alt=\"\" src=\"https:\/\/www.forgemotorsport.co.uk\/userfiles\/images\/sys\/products\/Catch_Can_for_Audi_TTRS_8S_and_RS3_49060jpeg.jpg\"\u003e\u003c\/p\u003e\r\n\u003c\/div\u003e\r\n\r\n\u003cdiv\u003e\r\n\u003cp\u003e\u003cimg alt=\"\" src=\"https:\/\/www.forgemotorsport.co.uk\/userfiles\/images\/sys\/products\/Catch_Can_for_Audi_TTRS_8S_and_RS3_85623jpeg.jpg\"\u003e\u003c\/p\u003e\r\n\u003c\/div\u003e\r\n\r\n\u003cdiv\u003e\r\n\u003cp\u003e\u003cimg alt=\"\" src=\"https:\/\/www.forgemotorsport.co.uk\/userfiles\/images\/sys\/products\/Catch_Can_for_Audi_TTRS_8S_and_RS3_29673jpeg.jpg\"\u003e\u003c\/p\u003e\r\n\u003c\/div\u003e\r\n\u003c\/div\u003e\r\n\r\n\u003cp\u003eThe 0.4l (400cc) catch tank boasts a collection of features intended to make it both easy to check and simple to drain, including a dipstick for level inspection and a well placed drain tap.\u003c\/p\u003e\r\n\r\n\u003cp\u003eThe design of the kit has also been carefully considered, hence its inner tube which is constructed from anti-static smooth fuel resistant nitrile rubber. This is paired with an outer cover made from reinforced stainless steel wire braid (a Forge specialty), specifically a partial inner braid and a full cover outer braid. We developed this complex arrangement in order for the tank to be resistant to both pressure expansion and vacuum collapse, and also to enable the kit to function within a clearly defined temperature range – 54°C to +150°C (-65°F to 300°F)\u003c\/p\u003e\r\n\r\n\u003cp\u003eFinally, this kit includes machined billet fittings that are anodised black to form an OEM-looking product when installed.\u003c\/p\u003e\r\n\r\n\u003cp\u003e\u003cstrong\u003ePlease note: \u003c\/strong\u003eWe have found that on some late RS3 and TTRS models from 2019 onwards an additional breather has been added to the PCV. If your engine has the additional breather the catch can will \u003cstrong\u003eNOT\u003c\/strong\u003e fit. To check this, remove your vehicles engine cover and check the visible PCV unit.\u003c\/p\u003e\r\n\r\n\u003cdiv\u003e\r\n\u003cdiv\u003e\r\n\u003cp\u003e\u003cimg alt=\"\" src=\"\/userfiles\/RS3%20Catch%20Can\/1.jpg\"\u003e\u003cbr\u003e\r\nAdditional Breather\u003c\/p\u003e\r\n\u003c\/div\u003e\r\n\r\n\u003cdiv\u003e\r\n\u003cp\u003e\u003cimg alt=\"\" src=\"\/userfiles\/RS3%20Catch%20Can\/2.jpg\"\u003e\u003cbr\u003e\r\nNo Additional Breather\u003c\/p\u003e\r\n\u003c\/div\u003e\r\n\u003c\/div\u003e\r\n\r\n\u003cp\u003e \u003c\/p\u003e\r\n\r\n\u003cp align=\"center\"\u003e\u003cstrong\u003e\u003cu\u003eHighlights\u003c\/u\u003e\u003c\/strong\u003e\u003c\/p\u003e\r\n\r\n\u003cp align=\"center\"\u003e\u003cstrong\u003e0.4L capacity*\u003cbr\u003e\r\nA drain tap for ease of emptying\u003cbr\u003e\r\nA dipstick for simple level inspection\u003cbr\u003e\r\n2 Quality stainless steel reinforced oil resistant hoses with black external braiding for that inconspicuous look\u003cbr\u003e\r\nInner tube is constructed from anti-static smooth fuel resistant nitrile rubber\u003cbr\u003e\r\nOuter cover is constructed from reinforced Stainless Steel wire braid consisting of partial inner braid \u0026amp; full cover outer braiding which is resistant to pressure expansion and vacuum\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFitting available:\u003c\/strong\u003e Please contact us for a quote.\u003c\/p\u003e","brand":"Forge Motorsport","offers":[{"title":"Default Title","offer_id":55938979922260,"sku":"FMCT3","price":329.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1019\/0425\/3268\/files\/Catch_Can_for_Audi_TTRS_8S_and_RS3_49060jpeg.jpg?v=1779723583"},{"product_id":"toyota-supra-mk5-a90-amp-bmw-z4-b58-oil-catch-can-fmct6","title":"Toyota Supra Mk5 (A90) \u0026 BMW Z4 (B58) Oil Catch Can","description":"\u003cp\u003eThis oil catch tank kit is for the Toyota Supra A90 and BMW Z4 with the BMW B58 Engine, developed by our in-house development team. Not only is it beautifully designed, it has been created to capture the maximum amount of harmful contaminants, including oil deposits, unused fuel vapours and moisture, all of which would ordinarily make their way back through to the inlet of the engine.\u003c\/p\u003e\r\n\r\n\u003cp\u003eWhen the B58 engine is tuned heavily blow by can occur resulting in poor breathing our specifically designed catch can system and extensive testing has proven our oil catch tank kit's ability to effectively reduce sludge and carbon build up, in turn allowing the engine to both breathe and perform more efficiently. It can therefore be viewed as a genuine performance enhancing product and one we recommend, particularly if you are planning more advanced power tuning at a later date.\u003c\/p\u003e\r\n\r\n\u003cp\u003eWith aesthetics also in mind our catch can has the bracket incorporated into the catch can lid and is placed behind the factory airbox heat shield meaning this important component can still be kept in situ.\u003c\/p\u003e\r\n\r\n\u003cp\u003e\u003cimg alt=\"\" src=\"\/userfiles\/images\/sys\/products\/Toyota_Supra_Mk5_A90_Oil_Catch_Can_48543jpeg.jpg\"\u003e\u003c\/p\u003e\r\n\r\n\u003cp\u003eThe 0.4l (400cc) catch tank boasts a slew of features intended to make it both easy to check and simple to drain, including a dipstick for level inspection.\u003c\/p\u003e\r\n\r\n\u003cp\u003eThe design of the breather adaptor and catch can was formed using the latest 3D solidworks software and engineered for a complete plug and play solution with no cutting or modifying of original components meaning the vehicle can return to stock in just under a hour.\u003c\/p\u003e\r\n\r\n\u003cdiv\u003e\r\n\u003cdiv\u003e\r\n\u003cp\u003e\u003cimg alt=\"\" src=\"\/userfiles\/images\/sys\/products\/Toyota_Supra_Mk5_A90_Oil_Catch_Can_87848jpeg.jpg\"\u003e\u003c\/p\u003e\r\n\u003c\/div\u003e\r\n\r\n\u003cdiv\u003e\r\n\u003cp\u003e\u003cimg alt=\"\" src=\"\/userfiles\/images\/sys\/products\/Toyota_Supra_Mk5_A90_Oil_Catch_Can_74319jpeg.jpg\"\u003e\u003c\/p\u003e\r\n\u003c\/div\u003e\r\n\u003c\/div\u003e\r\n\r\n\u003cp\u003eThe design of the kit has also been carefully considered, hence its inner tube which is constructed from anti-static smooth fuel resistant nitrile rubber. This is paired with an outer cover made from reinforced stainless steel wire braid (a Forge specialty), specifically a partial inner braid and a full cover outer braid. We developed this complex arrangement in order for the tank to be resistant to both pressure expansion and vacuum collapse, and also to enable the kit to function within a clearly defined temperature range – 54°C to +150°C (-65°F to 300°F)\u003c\/p\u003e\r\n\r\n\u003cp\u003e\u003cimg alt=\"\" src=\"\/userfiles\/images\/sys\/products\/Toyota_Supra_Mk5_A90_Oil_Catch_Can_30482jpeg.jpg\"\u003e\u003c\/p\u003e\r\n\r\n\u003cp\u003eFinally, this kit includes machined billet fittings that are anodised black to form an OEM-looking product when installed.\u003c\/p\u003e\r\n\r\n\u003cp\u003e\u003cimg alt=\"\" src=\"\/userfiles\/Install%20Levels\/3.jpg\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFitting available:\u003c\/strong\u003e Please contact us for a quote.\u003c\/p\u003e","brand":"Forge Motorsport","offers":[{"title":"Default Title","offer_id":55938994536788,"sku":"FMCT6","price":413.57,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1019\/0425\/3268\/files\/Toyota_Supra_Mk5_A90_Oil_Catch_Can_44380jpeg.jpg?v=1779723661"},{"product_id":"oil-cooler-for-toyota-yaris-gr-fmoc12","title":"Oil Cooler for Toyota Yaris GR","description":"\u003cp\u003e\u003cstrong\u003eThis will fit both left and right hand drive vehicles\u003c\/strong\u003e\u003c\/p\u003e\r\n\r\n\u003cp\u003eDue to the Toyota Yaris GR’s huge popularity as a fast road car, it was only logical that it is now being used as a capable track day vehicle. However, the difference of spirited road use or hard track laps does highlight some chinks in the Toyota’s usual reliable armour. Cooling being the most criticized area both with inlet air temperatures and in this case engine oil temperatures. FMOC12 has been developed with the same engineering expertise from our direct involvement within the \u003cstrong\u003eBTCC and Mini Challenge race series\u003c\/strong\u003e, where we have provided race proven cooling packages. These see extensive driving over the race season calendar, and we have directly transferred our knowledge from this over to our road going products, so we are proud to give the Yaris GR the same motorsport treatment. By doing this, you can lower your oil temps on and off the track whilst providing a product that does not skimp on quality, so much so that it is backed by our \u003cstrong\u003eForge Lifetime Guarantee*\u003c\/strong\u003e\u003c\/p\u003e\r\n\r\n\u003cdiv\u003e\r\n\u003cdiv\u003e\r\n\u003cp\u003e\u003cimg alt=\"\" src=\"https:\/\/www.forgemotorsport.co.uk\/userfiles\/images\/sys\/products\/Oil_cooler_for_Toyota_Yaris_GR_87618jpeg.jpg\"\u003e\u003c\/p\u003e\r\n\u003c\/div\u003e\r\n\r\n\u003cdiv\u003e\r\n\u003cp\u003e\u003cimg alt=\"\" src=\"https:\/\/www.forgemotorsport.co.uk\/userfiles\/images\/sys\/products\/Oil_cooler_for_Toyota_Yaris_GR_82667jpeg.jpg\"\u003e\u003c\/p\u003e\r\n\u003c\/div\u003e\r\n\r\n\u003cdiv\u003e\r\n\u003cp\u003e\u003cimg alt=\"\" src=\"https:\/\/www.forgemotorsport.co.uk\/userfiles\/images\/sys\/products\/Oil_cooler_for_Toyota_Yaris_GR_14384jpeg.jpg\"\u003e\u003c\/p\u003e\r\n\u003c\/div\u003e\r\n\u003c\/div\u003e\r\n\r\n\u003cdiv\u003e\r\n\u003cdiv\u003e \u003c\/div\u003e\r\n\u003c\/div\u003e\r\n\r\n\u003cp\u003eFMOC12 has its inlet and outlets placed in the correct position for\u003cstrong\u003e optimum flow\u003c\/strong\u003e. When oil coolers are fitted upside-down this can lead to cavitation (air locks) within the system, which over a prolonged period of time can lead to engine fatigue and potentially internal component damage due to insufficient engine lubrication.The research and development team spent countless hours researching the best possible configuration of cooler fitment for the Yaris GR with all aspects of the design being considered. This led to us developing a\u003cstrong\u003e bespoke fabricated item\u003c\/strong\u003e that would not only be \u003cstrong\u003eeasy to install \u003c\/strong\u003ebut also be the\u003cstrong\u003e best performing product \u003c\/strong\u003ecurrently on the market.\u003c\/p\u003e\r\n\r\n\u003cp\u003e\u003cstrong\u003eApproximate total oil capacity of the Yaris GR when fitted with the Forge oil cooler is 4.75 litres.\u003c\/strong\u003e\u003c\/p\u003e\r\n\r\n\u003cp\u003eUnlike many oil cooler kits, the FMOC12 keeps the factory oil to water cooler in position. This essentially \u003cstrong\u003edoubles your engines oil cooling\u003c\/strong\u003e. We’ve also developed the kit to use a bespoke laser cut aluminium bracket which makes for perfect fitment to the Toyota Yaris GR crash bar. Supplied with the performance part kit are 2x pre-assembled, high-quality double braided AN-8 oil lines. \u003c\/p\u003e\r\n\r\n\u003cp\u003eThe Forge oil cooler is available in \u003cstrong\u003ethree colour choices\u003c\/strong\u003e, stealth black for the OEM look, raw motorsport alloy. or performance red, for a racing parts feel.\u003c\/p\u003e\r\n\r\n\u003cdiv\u003e\r\n\u003cdiv\u003e\r\n\u003cp\u003e\u003cimg alt=\"\" src=\"https:\/\/www.forgemotorsport.co.uk\/userfiles\/images\/sys\/products\/Oil_cooler_for_Toyota_Yaris_GR_16025jpeg.jpg\"\u003e\u003c\/p\u003e\r\n\u003c\/div\u003e\r\n\r\n\u003cdiv\u003e\r\n\u003cp\u003e\u003cimg alt=\"\" src=\"https:\/\/www.forgemotorsport.co.uk\/userfiles\/images\/sys\/products\/Oil_cooler_for_Toyota_Yaris_GR_65932jpeg.jpg\"\u003e\u003c\/p\u003e\r\n\u003c\/div\u003e\r\n\r\n\u003cdiv\u003e\r\n\u003cp\u003e\u003cimg alt=\"\" src=\"https:\/\/www.forgemotorsport.co.uk\/userfiles\/images\/sys\/products\/Oil_cooler_for_Toyota_Yaris_GR_45651jpeg.jpg\"\u003e\u003c\/p\u003e\r\n\u003c\/div\u003e\r\n\u003c\/div\u003e\r\n\r\n\u003cp align=\"center\"\u003e \u003c\/p\u003e\r\n\r\n\u003cp\u003eDuring our time developing new performance products, we found\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFitting available:\u003c\/strong\u003e Please contact us for a quote.\u003c\/p\u003e","brand":"Forge Motorsport","offers":[{"title":"Black","offer_id":55939002204500,"sku":"FMOC12-BLACK","price":562.57,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1019\/0425\/3268\/files\/Oil_cooler_for_Toyota_Yaris_GR_25481jpeg.jpg?v=1779723696"},{"product_id":"oil-cap-for-toyota-yaris-gr-and-corolla-gr-fmcap8","title":"Oil Cap for Toyota Yaris GR and Corolla GR","description":"\u003cp\u003eFMCAP8 is Forge Motorsport's machined billet oil cap which replaces the OE plastic item found in the Toyota 1.6 GR engines. Like all of our caps and covers, FMCAP8 has been crafted from solid billet 6061 aerospace grade aluminium, and then machined to the specifications created from Forges in house CAD team. Every single machined product is made at our Gloucestershire HQ by engineers with over 30 years of experience.\u003c\/p\u003e\r\n\r\n\u003cp\u003eInstalling FMCAP8 will ensure that you will never again experience a oil breach from the original oil cap due to low tolerance design.\u003c\/p\u003e\r\n\r\n\u003cp\u003eTo customise the look we have designed our caps to be constructed from two pieces. This allows for different colour options to be chosen for each part of the oil cap to create a bespoke product which will enhance any engine bay. The finishes available are mirror polished finish or gloss anodised in either black or red. Whichever combination you choose the finished item you will receive will be exquisite.\u003c\/p\u003e\r\n\r\n\u003cp\u003eLike all Forge Motorsport products FMCAP8 is covered with our unmatched lifetime warranty.*\u003c\/p\u003e\r\n\r\n\u003cp\u003e\u003cstrong\u003ePlease take care to read the fitting \u003c\/strong\u003e\u003cstrong\u003einstructions\u003c\/strong\u003e\u003cstrong\u003e fully before pushing the insert into the body of the cap.\u003c\/strong\u003e\u003c\/p\u003e\r\n\r\n\u003cp\u003eCompatible Vehicles for fitment of this oil cap include: \u003c\/p\u003e\r\n\r\n\u003cul\u003e\r\n\t\u003cli\u003eToyota Yaris GR (Gen1)\u003c\/li\u003e\r\n\t\u003cli\u003eToyota Yaris GR (Gen2)\u003c\/li\u003e\r\n\t\u003cli\u003eToyota Corolla GR\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\r\n\u003cp\u003e\u003cimg alt=\"\" src=\"\/userfiles\/Install%20Levels\/1.jpg\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFitting available:\u003c\/strong\u003e Please contact us for a quote.\u003c\/p\u003e","brand":"Forge Motorsport","offers":[{"title":"Alloy Finish \/ Alloy Finish","offer_id":55939030090068,"sku":"FMCAP8-ALL-ALL","price":46.33,"currency_code":"GBP","in_stock":true},{"title":"Alloy Finish \/ Black Finish","offer_id":55939030122836,"sku":"FMCAP8-ALL-BLA","price":46.33,"currency_code":"GBP","in_stock":true},{"title":"Alloy Finish \/ Red Finish","offer_id":55939030155604,"sku":"FMCAP8-ALL-RED","price":46.33,"currency_code":"GBP","in_stock":true},{"title":"Black Finish \/ Alloy Finish","offer_id":55939030188372,"sku":"FMCAP8-BLA-ALL","price":46.33,"currency_code":"GBP","in_stock":true},{"title":"Black Finish \/ Black Finish","offer_id":55939030221140,"sku":"FMCAP8-BLA-BLA","price":46.33,"currency_code":"GBP","in_stock":true},{"title":"Black Finish \/ Red Finish","offer_id":55939030253908,"sku":"FMCAP8-BLA-RED","price":46.33,"currency_code":"GBP","in_stock":true},{"title":"Red Finish \/ Alloy Finish","offer_id":55939030286676,"sku":"FMCAP8-RED-ALL","price":46.33,"currency_code":"GBP","in_stock":true},{"title":"Red Finish \/ Black Finish","offer_id":55939030319444,"sku":"FMCAP8-RED-BLA","price":46.33,"currency_code":"GBP","in_stock":true},{"title":"Red Finish \/ Red Finish","offer_id":55939030352212,"sku":"FMCAP8-RED-RED","price":46.33,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1019\/0425\/3268\/files\/Oil_Cap_for_Hyundai_and_Kia_695e0b31901c6_1jpeg.jpg?v=1779723783"},{"product_id":"mmx-s65-vanos-covers-bmw-e90-e92-e93-m3","title":"MMX S65 Vanos Cover Set","description":"MMX S65 Vanos Cover Set \u003ch2\u003eMMX aluminium VANOS covers fix a known S65 weak point.\u003c\/h2\u003e\u003cp\u003eAt MMX, were proud to offer a smart and reliable fix for a well-known issue affecting the BMW S65 engine. The original VANOS covers, made from plastic, are prone to cracking, breaking or coming loose over time. In some cases, they can even fall off entirely. When this happens, bits of plastic can make their way into the oil system, potentially blocking the oil pickup and causing oil starvation. This can result in catastrophic internal engine failure. The issue is not the design itself, but rather the material BMW used.\u003cbr\u003e\u003cbr\u003eWeve developed a solution that completely eliminates this risk. Our upgraded VANOS covers are CNC machined from high-grade 6062-T6 aluminium and designed to be a true replacement for the original plastic parts. These covers are built to last and wont become brittle or fail over time like the factory versions. Unlike other aftermarket options, weve ensured the internal springs remain fully enclosed for added protection and reliability.\u003cbr\u003e\u003cbr\u003eInstallation is simple and requires no special tools. The covers snap securely into place, providing a hassle-free upgrade with immediate peace of mind. Each set is finished in anodised black to give a clean and durable look that blends in perfectly with the engine bay.\u003cbr\u003e\u003cbr\u003eLike all MMX products, these covers are designed and engineered right here in the UK. BMW does not offer the plastic VANOS covers separately, which often leaves owners facing the costly option of replacing the entire VANOS unit. Our solution is more cost-effective, more durable and offers proper long-term protection for your S65 engine.\u003c\/p\u003e\u003ch2\u003eVehicle fitment.\u003c\/h2\u003e\u003cp\u003eWhile every effort has been made to ensure the accuracy of vehicle information, we are not liable for abnormalities or inaccurate data. Customers are wholly responsible for checking fitment for their specific vehicle and engine variant.\u003c\/p\u003e Series\u003cp\u003eE-Series\u003c\/p\u003eChassis code\u003cp\u003eE90, E92 \u0026amp; E93\u003c\/p\u003eModel year\u003cp\u003e2005-2013\u003c\/p\u003eModel variant\u003cp\u003eM3\u003c\/p\u003eEngine code\u003cp\u003eS65\u003c\/p\u003eView all\n\u003cp\u003e\u003cstrong\u003eFitting available:\u003c\/strong\u003e Please contact us for a quote.\u003c\/p\u003e","brand":"MMX","offers":[{"title":"Default Title","offer_id":55940395172180,"sku":"MMR03-2001","price":329.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1019\/0425\/3268\/files\/MMR03-20017.png?v=1779741062"},{"product_id":"mmx-o-ring-service-kit-b58-oil-filter-and-housing","title":"MMX O-Ring Service Kit for MMX B58 Oil Filter and Housing","description":"\u003ch3\u003eGenuine MMX O-Ring service kit for the MMX oil filter and billet housing. Does not include MMX oil filter or billet housing, only the four O-Rings needed to service our reusable filter.\u003c\/h3\u003e\u003cp\u003eThe MMX oil filter and housing contains four O-Rings within the kit. We recommend you replace the O-Ring set on a regular basis when changing or cleaning the MMX filter, in order to maintain the integrity of the sealing properties it was designed to provide.\u003c\/p\u003e\u003cp\u003eAs it's a direct replacement with the original O-Ring set supplied, it's a very straightforward process to swap and replace.\u003c\/p\u003e\u003cp\u003eFitment is limited to the MMX oil filter (MMR17-1502) to protect against the notorious B58 oil filter collapse.\u003c\/p\u003e\u003cp\u003e\n\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFitting available:\u003c\/strong\u003e Please contact us for a quote.\u003c\/p\u003e","brand":"MMX","offers":[{"title":"Default Title","offer_id":55940396155220,"sku":"MMR17-0000","price":7.26,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1019\/0425\/3268\/files\/MMR17-00005.png?v=1779741073"},{"product_id":"mmr-oil-filter-housing-for-bmw-b58-b57","title":"MMX Oil filter housing | BMW B58 \u0026 B57","description":"The MMX Oil Filter Housing for BMW B58 engines is beautifully over-engineered in customary MMX fashion to give an exquisite feel and exceptional product experience. This direct replacement housing replaces the cheap plastic oil filter housing which is fragile and often cracks, leading to oil leaks. \u003cp\u003e\n\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFitting available:\u003c\/strong\u003e Please contact us for a quote.\u003c\/p\u003e","brand":"MMX","offers":[{"title":"Default Title","offer_id":55940396187988,"sku":"MMR17-1501","price":101.49,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1019\/0425\/3268\/files\/OILFILTERHOUSINGHEAD2.png?v=1779741074"},{"product_id":"mmx-oil-filter-housing-for-bmw-s58","title":"MMX Oil filter housing | BMW | S58","description":"MMX Oil Filter Housing | BMW S58\r\u003cp\u003e\rUpgrade your engine's reliability with the \u003cstrong\u003eMMX Oil Filter Housing\u003c\/strong\u003e, designed for all S58-equipped BMWs. This billet aluminium housing replaces the fragile OE plastic unit, eliminating the common problem of cracks and oil leaks during filter changes.\r\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eConstructed from 6061 aerospace-grade aluminium for ultimate strength and durability\u003c\/li\u003e\n\u003cli\u003eCNC machined with precision and gloss black anodised finish for lasting aesthetics\u003c\/li\u003e\n\u003cli\u003eLightweight yet extremely durable design\u003c\/li\u003e\n\u003cli\u003eIntegrated pressure control oil bypass no need to transfer OE plastic bypass valve\u003c\/li\u003e\n\u003cli\u003eEliminates 'weeping' oil leaks caused by cracked OE housings\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eBenefits\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eEnhanced engine reliability and longevity\u003c\/li\u003e\n\u003cli\u003eProfessional-quality finish enhances engine bay appearance\u003c\/li\u003e\n\u003cli\u003eReduces maintenance hassle during oil changes\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eVehicle Fitment\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries:\u003c\/strong\u003e All S58-equipped BMWs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eChassis code:\u003c\/strong\u003e All S58-equipped BMWs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eModel year:\u003c\/strong\u003e 2019+\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEngine code:\u003c\/strong\u003e S58\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cem\u003eAlways verify fitment for your specific vehicle before purchase.\u003c\/em\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eMMX Oil Filter Housing:\u003c\/strong\u003e Durable, precise, and designed to eliminate OE plastic housing failures for BMW S58 engines.\r\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFitting available:\u003c\/strong\u003e Please contact us for a quote.\u003c\/p\u003e","brand":"MMX","offers":[{"title":"Default Title","offer_id":55940396220756,"sku":"MMR17-1601","price":101.49,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1019\/0425\/3268\/files\/MMR17-16022.png?v=1779741074"},{"product_id":"mmr-oil-change-service-kit-for-bmw-b58-b57","title":"MMX Oil Change Service Kit Bundle for BMW B58 \u0026 B57","description":"The MMX Oil Change Service Kit for BMW B58 and B57 engines is a 3-piece bundle of MMX Upgrades that will last the lifetime of your engine. By choosing this replacement kit for your next oil change, you can get on with enjoying driving your car without the worries of future failures, safe in the knowledge that as lifetime parts, these upgrades will pay for themselves in the longer term! \u003cp\u003e\u003cstrong\u003e\n\u003cp\u003e\u003cstrong\u003eFitting available:\u003c\/strong\u003e Please contact us for a quote.\u003c\/p\u003e\u003c\/strong\u003e\u003c\/p\u003e","brand":"MMX","offers":[{"title":"Default Title","offer_id":55940396253524,"sku":"MMR17-1500FK","price":178.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1019\/0425\/3268\/files\/OILCHANGEKITHEAD1MMR17-1500FK1.jpg?v=1779741075"},{"product_id":"mmr-magnetic-oil-sump-plug-for-s63-bmw","title":"MMX Magnetic engine oil plug | S63 Engine","description":"MMX Magnetic Engine Oil Plug | S63 BMW Engine | M18 x 1.5\r\u003cp\u003e\rProtect your BMW S63 engine with the \u003cstrong\u003eMMX Performance Magnetic Sump Plug\u003c\/strong\u003e. Designed to catch ferrous metal particles before they circulate through your engine, this M18 x 1.5 magnetic plug reduces wear on critical components such as crankshaft bearings and camshaft caps.\r\u003c\/p\u003e\u003ch2\u003eFeatures\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMagnetic Protection:\u003c\/strong\u003e Large magnetic surface captures metal debris from your engine oil.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDurable Construction:\u003c\/strong\u003e Crafted from lightweight T6-6061 aluminium and gloss black anodised for longevity.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOE Replacement Fit:\u003c\/strong\u003e Direct replacement for your BMW S63 M18 x 1.5 sump plug.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSealing Washers Included:\u003c\/strong\u003e Comes with 5 washers; additional packs available.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReduces Engine Wear:\u003c\/strong\u003e Protects crankshaft bearings, camshaft caps, and other sensitive components.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEasy Installation:\u003c\/strong\u003e Plug-and-play design, no modifications required.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eVehicle Fitment\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries:\u003c\/strong\u003e All BMW S63 engines with M18 x 1.5 thread\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eChassis code:\u003c\/strong\u003e All BMW S63 engines with M18 x 1.5 thread\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eModel year:\u003c\/strong\u003e All BMW S63 engines with M18 x 1.5 thread\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cem\u003eAlways verify fitment for your specific vehicle before purchasing.\u003c\/em\u003e\u003c\/p\u003e\u003cp\u003e\rInsist on an \u003cstrong\u003eMMX Magnetic Engine Oil Plug\u003c\/strong\u003e at your next service to safeguard your engine and maintain peak performance.\r\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFitting available:\u003c\/strong\u003e Please contact us for a quote.\u003c\/p\u003e","brand":"MMX","offers":[{"title":"Default Title","offer_id":55940396384596,"sku":"MMR03-0506","price":24.02,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1019\/0425\/3268\/files\/MMR03-05065.png?v=1779741078"},{"product_id":"mmr-low-temperature-oil-thermostat-for-bmw-n54-n55","title":"MMX Low Temp Thermostat | BMW | N54 | N55","description":"**STOCK DUE OCTOBER, 24** Control the oil temperature on your BMW N54 or N55 engine by \u003cp\u003eAdding power to your engine generates more heat to disperse. Equally, hard driving, particularly in a warmer climate also pushes temperatures higher than optimum. Significantly increased oil temperatures means only one thing: a decrease in the ability for your engine to stay properly lubricated. \u003cbr\u003e\u003cbr\u003eIn order to properly control the oil temperature on your N54 or N55 engine, \u003cbr\u003e\u003cbr\u003eMachined from aircraft grade T-6061 aluminium before being anodised in the proprietary Dark Anthracite MMX finish for durability.\u003cbr\u003e\u003cbr\u003eInstallation of the MMX Low Oil Temperature Thermostat is relatively easy into the OE oil thermostat housing found on the N54 and N55 engines. Please note: only suitable for models from 2008 onwards. \u003cbr\u003e\u003cbr\u003eThis upgrade is a highly recommended, affordable modification for any hard-driven cars used on track, or that have an increased power \/ torque output and are therefore generating more heat than OE car would do. \u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFitting available:\u003c\/strong\u003e Please contact us for a quote.\u003c\/p\u003e","brand":"MMX","offers":[{"title":"Default Title","offer_id":55940397465940,"sku":"MMR17-0101","price":45.5,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1019\/0425\/3268\/files\/m135i_low_temp_thermostat_2.png?v=1779741097"},{"product_id":"mmr-lifetime-oil-filter-for-bmw-b58-b57","title":"MMX Lifetime Oil Filter for BMW B58 \u0026 B57","description":"Get rid of the notorious B58 oil filter disintegration problem forevermore with the MMX Oil Filter. By replacing the factory paper filter element with MMX's advanced high-flow, high-filtration stainless steel filter unit, you will protect your engine from the big bills (and potentially worse) caused by the OE filter's collapse failure.\n\u003cp\u003e\u003cstrong\u003eFitting available:\u003c\/strong\u003e Please contact us for a quote.\u003c\/p\u003e","brand":"MMX","offers":[{"title":"Default Title","offer_id":55940397498708,"sku":"MMR17-1502","price":52.49,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1019\/0425\/3268\/files\/Filterheader1.png?v=1779741099"},{"product_id":"mmx-dct-transmission-oil-cooler-bmw-e9x-m3","title":"MMX DCT Transmission Oil Cooler BMW E9x M3","description":"\u003cp\u003eThis cooler acts as an upgrade for the E9x M3 DCT cooler, keep those temps under control with the ultimate solution! Whether you have a supercharger or you are simply looking to add reliability with vastly improved DCT cooling to your factory-spec M3, this DCT cooler will help keep your gearbox oil temperatures in check, whether in demanding, on-track conditions or sitting in traffic.\u003c\/p\u003e\u003cp\u003eCore Dimensions: Width: 30cm Height: 23cm Depth: 4cm\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFitting available:\u003c\/strong\u003e Please contact us for a quote.\u003c\/p\u003e","brand":"MMX","offers":[{"title":"Default Title","offer_id":55940398186836,"sku":"MMR17-0202","price":546.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1019\/0425\/3268\/files\/Template_2c889224-c0bd-419b-805f-122c38cc77ed.jpg?v=1779741117"},{"product_id":"mmr-single-pice-crank-hub-for-bmw-n55-s55-copy","title":"MMX Crank hub capture plate | BMW S55 | N55","description":"Issues relating to the standard three-piece crank hub on the S55 \u0026amp; N55 engine are widely known, but include the need to ensure the OE crank bolt can't loosen, which is one cause of the crank hub friction plates starting to slip. The crank bolt is susceptible to loosening due to the engine's natural vibrations and harmonics, meaning that with just the slightest loss of torque, your timing will slip out of correct adjustment. With potentially disastrous consequences.\n\u003cp\u003e\u003cstrong\u003eFitting available:\u003c\/strong\u003e Please contact us for a quote.\u003c\/p\u003e","brand":"MMX","offers":[{"title":"Default Title","offer_id":55940398219604,"sku":"MMR20-1002","price":120.11,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1019\/0425\/3268\/files\/m2c_m3_m4_captureplate.png?v=1779741118"},{"product_id":"mmr-single-pice-crank-hub-for-bmw-n55-s55","title":"MMX Crank hub \u0026 capture plate | S55 | N55","description":"Issues relating to the standard three-piece crank hub on the S55 \u0026amp; N55 engine are (unfortunately) widely known, but these are fully addressed with the installation of the MMX one-piece billet Crank Hub, together with the option to add our Capture Plate for ultimate security. \u003cp\u003eThe OE crank hub unit's friction plate are known to slip, causing the timing to alter enough that piston-to-valve contact can occur and, if not totally standard and within the warranty period, leaves owners with a very expensive repair bill!\u003cbr\u003e\u003cbr\u003eWe have developed this Single-Piece Crank Hub together with our optional Capture Plate to ensure owners have complete peace of mind, whether on an untuned factory car or equally for those that wish to increase the power and torque output without ever having to worry again; MMX have engineered the most comprehensive solution on the market and at one of the most compelling price points.\u003c\/p\u003e\u003cp\u003e\u003cem\u003e\n\u003cp\u003e\u003cstrong\u003eFitting available:\u003c\/strong\u003e Please contact us for a quote.\u003c\/p\u003e\u003c\/em\u003e\u003c\/p\u003e","brand":"MMX","offers":[{"title":"Without MMR capture plate","offer_id":55940398252372,"sku":"MMR20-1001","price":468.47,"currency_code":"GBP","in_stock":true},{"title":"With MMR capture plate","offer_id":55940398285140,"sku":"MMR20-1003FK","price":544.91,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1019\/0425\/3268\/files\/one-_piece_crank_hub_capture_plate.png?v=1779741119"},{"product_id":"mmx-bmw-s58-billet-oil-filer-cap","title":"MMR S58 Oil Filler Cap","description":"\u003ch3\u003eThe MMX billet oil filler cap for MINI B48E equipped vehicles has been designed from the ground up in the UK, from a solid piece of billet aluminium. Each cap was designed to directly replace the OE cap, not merely stuck in place.\u003c\/h3\u003e\u003cp\u003eAs a guide, the 2.0L 4cyl B48E engine can be found in JCW and GP3 models from 2019+ with 306 BHP output.\u003c\/p\u003e\u003cp\u003eEach MMX cap starts life as a solid billet of 6061 aerospace-grade aluminium. It's meticulously machined from this billet with the latest CNC 5-axis technology, before being polished, then gloss-anodised to stay beautiful year after year.\u003c\/p\u003e\u003cp\u003eIt has been designed to instantly give your MINI an under-bonnet boost in the aesthetic department, finished in a deep gloss black anodised finish. Please note if the part is under excessive heat for prolonged periods of time, it can affect the overall finish, which is unavoidable with anodised aluminium products.\u003c\/p\u003e\u003cp\u003eIt joins an existing range of engine dress-up products for a complete under-bonnet transformation to your engine bay.\u003c\/p\u003e\u003cp\u003eNever again will you worry whether you tightened your oil cap fully, as the internally sprung cap clicks hard and locks into place. This cap will ensure that you'll never again have the problem of 'weeping' oil leaks from the standard cap - a known issue with many of these engines as age and mileage causes them to deteriorate.\u003c\/p\u003e\u003cp\u003eThe carefully considered design gives ample surface grip area for your fingers, making installation and filling your engine oil that little bit easier.\u003c\/p\u003e\u003cp\u003e\n\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFitting available:\u003c\/strong\u003e Please contact us for a quote.\u003c\/p\u003e","brand":"MMX","offers":[{"title":"Default Title","offer_id":55940404281684,"sku":"MMR03-1601","price":81.89,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1019\/0425\/3268\/files\/MMR03-1601_0b78881a-3d01-4e52-9fcd-3e423e293694.png?v=1779741146"},{"product_id":"mmr-oil-catch-can-kit-for-bmw-n55","title":"MMR Performance M2 Oil Catch Can Kit | M135I|M235I|M2","description":"The MMX Oil Catch Can Kit for BMW F2x \u0026amp; F3x N55-powered M135i I M235i I 335i I 435i has been engineered to separate unwanted oil from the PCV system before it is recirculated back into the intake. Keep your intercooler and inlet tracts clear of oil build-up for a cleaner, more reliable and better performing engine. \u003cp\u003eThe Catch Can has been engineered to ensure that the engine is running at its optimum performance. By separating unwanted oil from the PCV (Positive Crankcase Ventilation) system before it can be recirculated back into the intake, the result is a cleaner, more reliable and better performing engine.\u003c\/p\u003e\u003cp\u003e\n\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFitting available:\u003c\/strong\u003e Please contact us for a quote.\u003c\/p\u003e","brand":"MMX","offers":[{"title":"Default Title","offer_id":55940404412756,"sku":"MMR17-0501FK","price":366.9,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1019\/0425\/3268\/files\/CATCHCANBMWN55_MMR17-0501FK_1.jpg?v=1779741150"},{"product_id":"mmr-oil-temperature-and-pressure-adaptor-for-bmw-n54-n55","title":"MMR Oil temperature and pressure adaptor for BMW N55 \u0026 S55","description":"The MMX billet adaptor is a helpful addition to BMW's N54 N55 and S55 engines for those wishing to run an auxiliary oil pressure or oil temperature gauge, replacing the plug found on the oil cooler thermostat assembly with a 1\/8NPT gauge adaptor. \u003cp\u003eThe MMX adaptor replaces the plug that can be found on the oil cooler thermostat assembly with a 1\/8NPT gauge adaptor, making a neat job of installing your sensor.\u003cbr\u003e\u003cbr\u003eManufactured from T6061 billet aluminium, our Billet Adaptor for the BMW N55\/N54 and S55 engines offers a high-quality aesthetic update.\u003cbr\u003e\u003cbr\u003eThe Adaptor is anodised in our trademark MMX Deep Gloss Black for a beautiful finish. \u003cbr\u003e\u003cbr\u003eThis makes a great compliment to our Oil Thermostat Cover Set, which can be ordered with or without this Adaptor - a must-have for those that like their engine bay looking at its best.\u003c\/p\u003e\u003cp\u003e\u003cem\u003ePlease Note:\u003c\/em\u003e\u003c\/p\u003e\u003cp\u003e\u003cem\u003eIf this part is exposed to excessive heat for prolonged periods of time, it can affect the overall finish which is unavoidable with anodised aluminium products.\u003c\/em\u003e\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFitting available:\u003c\/strong\u003e Please contact us for a quote.\u003c\/p\u003e","brand":"MMX","offers":[{"title":"Default Title","offer_id":55940404543828,"sku":"MMR03-0502-KP","price":16.37,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1019\/0425\/3268\/files\/ShopImage2.jpg?v=1779741153"},{"product_id":"mmr-oil-filter-housing-for-bmw-n54-n55-s55","title":"MMR Oil filter housing for BMW N54, N55 \u0026 S55","description":"The MMX Oil Filter Housing is beautifully over-engineered in customary MMX fashion to give an exquisite feel and exceptional product experience. For all BMW N20, N52, N54, N55, S55 engines, this housing replaces the cheap plastic oil filter housing which is fragile and often cracks, leading to oil leaks. \u003cp\u003eBMW equipped their cars with a plastic oil filter housing which is fragile and is often cracked when removing and replacing, which in turn can result in oil leaks. This Filter Housing will ensure that you'll never again have the problem of these 'weeping' oil leaks from the standard part.\u003c\/p\u003e\u003cp\u003e\u003cbr\u003e\n\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFitting available:\u003c\/strong\u003e Please contact us for a quote.\u003c\/p\u003e","brand":"MMX","offers":[{"title":"Default Title","offer_id":55940404576596,"sku":"MMR03-0101-BL","price":93.31,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1019\/0425\/3268\/files\/OilFilterHosuing1-BL.jpg?v=1779741155"},{"product_id":"mmx-magnetic-sump-plug-seal-kit","title":"MMR Magnetic Sump Plug Seals x5 | B58 | N55 Etc.","description":"\u003ch2\u003eMMX Magnetic Sump Plug Seals x5 | B58 | N55 Etc.\u003c\/h2\u003e\u003cp\u003eProtect your engine and ensure optimal performance with the \u003cstrong\u003eMMX Magnetic Sump Plug Seals\u003c\/strong\u003e. Designed to capture metal particles and prevent them from circulating through your engine, these magnetic seals provide an extra layer of protection for your oil system.\u003c\/p\u003e\u003ch3\u003eKey Features \u0026amp; Benefits:\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMagnetic Protection:\u003c\/strong\u003e Captures ferrous particles to reduce wear on engine components.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh-Quality Construction:\u003c\/strong\u003e Durable and precision-engineered for reliable long-term use.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEasy Installation:\u003c\/strong\u003e Fits standard sump plugs without modifications.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSet of 5:\u003c\/strong\u003e Comes with five seals for multiple applications or future replacements.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility:\u003c\/strong\u003e Designed for engines such as B58, N55, and similar BMW engines.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eVehicle Fitment:\u003c\/h3\u003e\u003cp\u003eWhile every effort has been made to ensure accuracy, customers are responsible for verifying fitment for their specific vehicle and engine variant.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFitting available:\u003c\/strong\u003e Please contact us for a quote.\u003c\/p\u003e","brand":"MMX","offers":[{"title":"Default Title","offer_id":55940404609364,"sku":"MMR03-0511","price":8.39,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1019\/0425\/3268\/files\/MMR03-0511_e8d8fb26-2b52-4c80-8062-bbdcc8ed4f86.png?v=1779741156"},{"product_id":"mmr-lifetime-oil-filter-for-bmw-s58","title":"MMR Lifetime oil filter | BMW | S58","description":"MMX Lifetime Oil Filter | BMW S58\r\u003cp\u003e\rProtect your engine for the life of your vehicle with the \u003cstrong\u003eMMX Lifetime Oil Filter\u003c\/strong\u003e. Designed for all S58-equipped BMWs, this reusable filter provides superior filtration and can be used repeatedly when properly cleaned at each oil change.\r\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eReusable design lasts the lifetime of the vehicle when maintained correctly\u003c\/li\u003e\n\u003cli\u003eProtects your engine as effectively as a brand-new filter every time\u003c\/li\u003e\n\u003cli\u003eRequires proper cleaning using solvent and compressed air for best performance\u003c\/li\u003e\n\u003cli\u003eRecommended to purchase two filters for continuous rotation\u003c\/li\u003e\n\u003cli\u003eProfessional servicing or authorized dealer assistance recommended if unsure\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003ePerformance \u0026amp; Benefits\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eEliminates the need for frequent filter replacements\u003c\/li\u003e\n\u003cli\u003eMaintains optimal engine protection with repeated use\u003c\/li\u003e\n\u003cli\u003eReduces long-term maintenance costs\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eVehicle Fitment\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries:\u003c\/strong\u003e All S58-equipped BMWs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eChassis code:\u003c\/strong\u003e All S58-equipped BMWs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eModel year:\u003c\/strong\u003e 2019+\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEngine code:\u003c\/strong\u003e S58\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cem\u003eAlways verify fitment for your specific vehicle before purchase.\u003c\/em\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eMMX Lifetime Oil Filter:\u003c\/strong\u003e Reusable, durable, and engineered to provide continuous engine protection for BMW S58-equipped vehicles.\r\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFitting available:\u003c\/strong\u003e Please contact us for a quote.\u003c\/p\u003e","brand":"MMX","offers":[{"title":"Default Title","offer_id":55940404871508,"sku":"MMR17-1602","price":52.49,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1019\/0425\/3268\/files\/Artboard1_fd2b39b6-150a-4ee1-bfcc-385396046a32.png?v=1779741164"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1019\/0425\/3268\/collections\/Engine_Components.png?v=1777619496","url":"https:\/\/fifty9performance.co.uk\/collections\/engine-components.oembed","provider":"Fifty9 Performance","version":"1.0","type":"link"}